Panasonic PV-GS50-K Manuel D’Utilisation

Page de 220
85
ª Camera Search 
(
≥In Camera Search Mode, images may contain 
mosaic-like noise patterns. This is a phenomenon 
that is characteristic of digital video and not a 
malfunction.
≥If the recording speed Modes (SP/LP) of previous 
recording and new recording are different, 
playback images may be distorted.
ª Quick Start 
(
≥During the Quick Start Standby Mode, a minute 
amount of electricity is consumed.
≥This Function is not activated in the following 
cases even if the Quick Start Recording Lamp 
lights:
≥A tape is not inserted, while the Tape Mode is 
set.
≥A Card is not inserted, while the Card Mode is 
set.
≥In the following cases, Quick Start is temporarily 
cancelled when the Quick Start Mode is set. Set 
the Camera Mode again, and the Quick Start 
Mode will be restored.
≥Set to the VCR Mode or Card Playback Mode
≥The Battery is replaced
≥If the [QUICK START] Button is pressed and held 
for approximately 2 seconds during the Quick Start 
Standby Mode, the Lamp will go off and the 
Palmcorder will turn off.
≥If the Palmcorder is not operated for approximately 
30 minutes after the Quick Start Recording Lamp 
lights, the Lamp will go off and the Palmcorder will 
turn off.
≥In the Automatic White Balance Mode, the color 
may be recorded unnaturally at the beginning of 
the recording.
ª Self-timer Recording 
(
≥When [BEEP SOUND] on the 
[OTHER FUNCTIONS1] Sub-Menu on the 
[CAMERA FUNCTIONS] Main-Menu is set to 
[ON], a beep sound will be emitted along with the 
Recording Lamp flashing in the Self-timer Standby 
Mode.
≥By operating the [OFF/ON/MODE] Switch, the 
Self-timer Standby Mode is cancelled.
ª Progressive PhotoShot
TM
 Function 
(
≥The still pictures are recorded at a slightly 
rewound point from where you press the 
[PHOTO SHOT] Button.
≥When you change to the still picture Mode, you will 
hear a click. This is the sound of the iris closing 
and not an indication of malfunction.
≥If you record still pictures in Progressive 
PhotoShot
TM
 Mode when your Palmcorder is set 
to Program AE, the brightness of the images may 
vary.
≥The picture may be blurred when recording a 
scene with many horizontal lines or fine patterns.
≥Using the MagicPix Function cancels the 
Progressive PhotoShot
TM
 Function.
About [PROGRESSIVE] Setting
≥When the [
æ] Indication is displayed, you can use 
the Progressive PhotoShot
TM
 Function.
When [PROGRESSIVE] is set to [ON]:
You can use the Progressive PhotoShot
TM
 Function 
at any time. In this case, however, the following 
functions are disabled.
≥[EFFECT1] Digital Effect Modes
≥Digital Zoom [D.ZOOM]
≥1/750 or faster shutter speed
When [PROGRESSIVE] is set to [AUTO]
You cannot use the Progressive PhotoShot 
Function in the following circumstances.
≥When the zoom magnification is approximately 
10
k or higher
≥When the shutter speed is 1/750 or faster
≥When [EFFECT1] is set to [WIPE], [MIX], 
[STROBE], [GAIN UP], [TRAIL], [MOSAIC], 
[MIRROR]
≥When the pictures are displayed on a Multi screen
ª Zoom In/Out Functions 
(
≥By pressing the [W/T] zoom lever to [W] or to [T] in 
Recording Pause Mode, you can zoom 1-10
k at 
the maximum speed of 1.8 seconds.
≥During recording, you can zoom 1-10k in as short 
a time as approximately 2.5 seconds.
≥During considerably fast zooming, the image may 
become out of focus temporarily.
≥When you are using a high amount of zoom, a 
sharper focus is achieved if the recording subject 
is approximately 4 feet (1.2 m) or more away from 
the Palmcorder.
Others
PV-GS50P.book  85 ページ  2003年2月17日 月曜日 午後6時30分