Panasonic AJ-HPX2700G Manuel D’Utilisation
157
Maintenance and Inspections: Warning System
Ma
int
int
enan
ce
an
d Ins
d Ins
pe
cti
on
s
s
11. P2 Card Error
Display window
indication
indication
If the error occurs during recording,
“00:00:00:11” appears in the time code
display field. The indication continues to
flash after recording is stopped and until
the next operation is performed. There is
no indication if the error occurs during
playback.
“00:00:00:11” appears in the time code
display field. The indication continues to
flash after recording is stopped and until
the next operation is performed. There is
no indication if the error occurs during
playback.
WARNING lamp
If the error occurs during recording, the
lamp flashes 4 times per second for a
period of about 3 seconds after recording
stops. The lamp does not light if the error
occurs during playback.
lamp flashes 4 times per second for a
period of about 3 seconds after recording
stops. The lamp does not light if the error
occurs during playback.
Tally lamp
If the error occurs during recording, the
lamp flashes 4 times per second for a
period of about 3 seconds after recording
stops. The lamp does not light if the error
occurs during playback.
lamp flashes 4 times per second for a
period of about 3 seconds after recording
stops. The lamp does not light if the error
occurs during playback.
Viewfinder
A flashing “CARD ERR ” appears. In
the actual indication the is replaced by
the slot number of the P2 card that
triggered the error.
the actual indication the is replaced by
the slot number of the P2 card that
triggered the error.
Warning tone
If the error occurs during recording, the
tone sounds 4 times per second for a
period of about 3 seconds after recording
stops. The tone does not sound if the
error occurs during playback.
tone sounds 4 times per second for a
period of about 3 seconds after recording
stops. The tone does not sound if the
error occurs during playback.
Warning description
An error has occurred while recording
data to or playing data from a P2 card.
data to or playing data from a P2 card.
Recording/playback
operation
operation
Stop recording or playback.
Countermeasures
Replace the affected P2 card.
12. FAN STOP
Display window
indication
indication
No display.
WARNING lamp
Blinks 4 times per second.
Tally lamp
No display.
Viewfinder
The “FAN STOP” indicator blinks while
recording continues.
recording continues.
Warning tone
It does not sound.
Warning description
The fan is at rest because something is
wrong with it.
wrong with it.
Recording/playback
operation
operation
The unit continues to operate. However,
when the unit operates with the fan
stopped, then the temperature inside
rises. While the unit continues to operate,
clips may not be recorded or played back
properly.
when the unit operates with the fan
stopped, then the temperature inside
rises. While the unit continues to operate,
clips may not be recorded or played back
properly.
Countermeasures
Immediately stop using the unit and
consult your distributor.
consult your distributor.
13. PROXY CARD ERROR
Display window
indication
indication
No display.
WARNING lamp
Flashes 4 times per second for a period
of about 3 seconds.
of about 3 seconds.
Tally lamp
Flashes 4 times per second for a period
of about 5 seconds.
of about 5 seconds.
Viewfinder
The “PROXY CARD ERROR” indicator
light up.
light up.
Warning tone
It does not sound.
Warning description
Proxy recording stops because of failure
on either the video encoder card or the
stream.
on either the video encoder card or the
stream.
Recording/playback
operation
operation
The unit continues to operate.
Countermeasures
Check the video encoder card or avoid
use of proxy recording.
use of proxy recording.
AJ-HPX2700G-VQT1V27_eng.book 157 ページ ２００８年９月２日 火曜日 午後５時４３分