Panasonic HDC-SD1 Manuel D’Utilisation

Page de 124
2
VQT1A34
Information for your safety
IF THE POWER CORD OF THIS EQUIPMENT 
IS DAMAGED, IT MUST BE REPLACED WITH 
AN ELECTRICALLY APPROVED POWER 
CORD.
Use only the recommended accessories.
≥Do not use any other AV cables, component 
cable and USB cables except the supplied one.
≥When you use the cable which are sold 
separately, please make sure to use the one 
whose length is less than 3 m.
≥Keep the Memory Card out of reach of children 
to prevent swallowing.
WARNING:
TO REDUCE THE RISK OF FIRE, 
ELECTRIC SHOCK OR PRODUCT 
DAMAGE,
DO NOT EXPOSE THIS APPARATUS TO 
RAIN, MOISTURE, DRIPPING OR 
SPLASHING AND THAT NO OBJECTS 
FILLED WITH LIQUIDS, SUCH AS VASES, 
SHALL BE PLACED ON THE 
APPARATUS.
USE ONLY THE RECOMMENDED 
ACCESSORIES.
DO NOT REMOVE THE COVER (OR 
BACK); THERE ARE NO USER 
SERVICEABLE PARTS INSIDE. REFER 
SERVICING TO QUALIFIED SERVICE 
PERSONNEL.
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT 
IN A BOOKCASE, BUILT-IN CABINET OR 
IN ANOTHER CONFINED SPACE. 
ENSURE THE UNIT IS WELL 
VENTILATED. TO PREVENT RISK OF 
ELECTRIC SHOCK OR FIRE HAZARD 
DUE TO OVERHEATING, ENSURE THAT 
CURTAINS AND ANY OTHER 
MATERIALS DO NOT OBSTRUCT THE 
VENTILATION VENTS.
DO NOT OBSTRUCT THE UNIT’S 
VENTILATION OPENINGS WITH 
NEWSPAPERS, TABLECLOTHS, 
CURTAINS, AND SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED 
FLAMES, SUCH AS LIGHTED CANDLES, 
ON THE UNIT.
DISPOSE OF BATTERIES IN AN 
ENVIRONMENTALLY FRIENDLY 
MANNER.
The socket outlet shall be installed near 
the equipment and easily accessible.
The mains plug of the power supply cord 
shall remain readily operable.
To completely disconnect this apparatus 
from the AC Mains, disconnect the power 
supply cord plug from AC receptacle.
Product Identification Marking is located on 
the bottom of units.
∫ How to replace the Fuse
(only for Hong Kong Special 
Administrative Region of China and 
Saudi Arabia)
The location of the fuse differ according to the 
type of AC mains plug (figures A and B).
Confirm the AC mains plug fitted and follow 
the instructions below.
Illustrations may differ from actual AC mains 
plug.
1) Open the fuse cover with a screwdriver.
2) Replace the fuse and close or attach the 
fuse cover.
Fuse cover
Figure A
Figure B
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
VQT1A34_GC_ENG.book  2 ページ  2007年1月27日 土曜日 午後1時46分