Panasonic DMC-FT5/DMC-TS5 Manuel D’Utilisation
- 82 -
Recording
∫
About the white balance
You can adjust the hue to your preferred setting using [WB Adjust.]
.
∫
To beautifully record the underwater red tinge (Underwater colour reproduction)
Subjects appear blue in pictures taken underwater. Using [Color Reproduction] in the [Rec]
menu will allow pictures to be taken without the subjects losing their red tone.
menu will allow pictures to be taken without the subjects losing their red tone.
1
Select [Color Reproduction] in the [Rec] menu.
2
Press 3/4 to select the effect, and then press [MENU/SET].
•
•
You can select the effect of [HIGH], [MEDIUM], [LOW], or [OFF].
•
Ichikawa Soft Laboratory has studied colour loss in water based on the results of measurements of a
large number of colour samples actually conducted in the ocean, and has developed “Natural Light
Technology” to reproduce vivid, accurate colours based on ongoing research into colour
reproduction of pictures taken underwater.
large number of colour samples actually conducted in the ocean, and has developed “Natural Light
Technology” to reproduce vivid, accurate colours based on ongoing research into colour
reproduction of pictures taken underwater.
¢
[Color Reproduction] in the [Rec] menu and [Color Reproduction] under [Retouch] in the [Playback]
menu make use of this technology.
¢ “Natural Light Technology” is the technology behind “SILKYPIX Marine Photography”, Ichikawa
menu make use of this technology.
¢ “Natural Light Technology” is the technology behind “SILKYPIX Marine Photography”, Ichikawa
Soft Laboratory’s digital reproduction software designed for underwater pictures.
http://www.isl.co.jp/SILKYPIX/marine/p/
•
Measured depth may not be accurate when pressure is applied to front or rear of this unit by
pressing with your hands, etc. In such a case, it is recommended to perform [Depth indicator] again
when you get back to the surface.
pressing with your hands, etc. In such a case, it is recommended to perform [Depth indicator] again
when you get back to the surface.
•
The display may differ significantly depending on the weather conditions (atmospheric pressure, air
temperature), or seawater temperature.
temperature), or seawater temperature.
•
For more accurate depth measurements, we recommend that you perform [Depth indicator] before
you dive underwater.
you dive underwater.
•
When the unit is wet immediately after coming out of the water, etc., it may not be able to measure
atmospheric pressure accurately. For details, read
atmospheric pressure accurately. For details, read
•
To prevent water leakage, make sure that there are no foreign objects, such as sand, hair, dust, etc.,
clamped and close the side door all the way until it clicks. Also, read
clamped and close the side door all the way until it clicks. Also, read
before using the camera.
•
Dip the camera in fresh water in a shallow container for 10 minutes or less after using it, then wipe
the water off with a soft, dry cloth.
the water off with a soft, dry cloth.
•
[Color Reproduction] is initially set to [LOW] on the camera.
•
Depending on the recording conditions or environment, the way the effect of [Color Reproduction] is
applied may vary.
applied may vary.