Panasonic DMC-LX100 Manuel D’Utilisation

Page de 332
66
SQW0021
Basics
Switching the display information on the recording screen
Using the level gauge
If you want to make sure that the camera is not slanted or tilted, for example, when you 
take a picture of a landscape, use the level gauge indication as a reference.
1
Press [DISP.] button to switch the display
Press the button to switch the display. Press the button until the 
level gauge is displayed.
2
Correct camera angle
 
Using the level gauge
The yellow line indicates the current angle. Correct the angle of the camera so that it 
matches the white line.
Tilting up or down
 •In this case, it is facing 
upward.
Tilting left or right
 •In this case, the right side has 
dropped.
 •When the camera is tilted very little or not at all, the level gauge will turn green.
 •When pictures are taken in portrait orientation, the level gauge is automatically 
switched to one for portrait orientation.
 
Even when angle is more or less corrected, there may be an error of about ±1 degree.
 
When [Level Gauge] is assigned to a function button, you can turn the level gauge on and off 
every time you press the function button.
Not available in the following cases:
 
When the camera is being moved, the level gauge may not be displayed correctly.
 
The level gauge may not be displayed correctly or the direction detect function 
may not 
operate correctly if the pictures are taken with the camera pointing sharply up or down.