Sony HXR-NX5P Manuel D’Utilisation
40
When the CH1 switch is set to INT
MIC
MIC
When the CH1 is set to INPUT1
2
Set the INPUT1 switch B to an
appropriate position for the microphone
connected to the INPUT1 jack A.
appropriate position for the microphone
connected to the INPUT1 jack A.
LINE: For inputting sound from an
audio device
MIC: For inputting sound from an
external microphone that does
not support the +48V power
source.
not support the +48V power
source.
MIC+48V:For inputting sound from a
device that supports the +48V
power source including the
supplied microphone.
power source including the
supplied microphone.
When you connect a microphone to the
INPUT2 jack, set the INPUT2 switch to
an appropriate position for that
microphone.
INPUT2 jack, set the INPUT2 switch to
an appropriate position for that
microphone.
b
Notes
• Do not operate the INPUT1/INPUT2 switches
during recording to prevent noise from being
recorded.
recorded.
• When you connect a device that supports the
+48V power source to the INPUT1 or INPUT2
jack, set the INPUT1/INPUT2 switches to MIC
prior to connecting the device. When you
disconnect the device, set the INPUT1/INPUT2
switch to MIC first, then disconnect it.
jack, set the INPUT1/INPUT2 switches to MIC
prior to connecting the device. When you
disconnect the device, set the INPUT1/INPUT2
switch to MIC first, then disconnect it.
• When you connect a microphone that does not
support the +48V power source to the INPUT1
or INPUT2 jack, set the INPUT1/INPUT2
switch to MIC. If you use it with the INPUT1/
INPUT2 switch set to MIC+48V, it may be
damaged or the recorded sound may be
distorted.
or INPUT2 jack, set the INPUT1/INPUT2
switch to MIC. If you use it with the INPUT1/
INPUT2 switch set to MIC+48V, it may be
damaged or the recorded sound may be
distorted.
You can adjust the volume of an internal
microphone or a microphone connected to
the INPUT1/INPUT2 jacks.
microphone or a microphone connected to
the INPUT1/INPUT2 jacks.
z
Tips
• See page 10 for details on attaching the supplied
1
Set the AUTO/MAN (CH1/CH2) switch
E of the channel to be adjusted to
MAN.
E of the channel to be adjusted to
MAN.
appears on the screen.
CH2 switch
position
position
Input channel and source
INT MIC
Internal
microphone
(L)
microphone
(L)
CH1
Internal
microphone
(R)
microphone
(R)
CH2*
INPUT1
Internal
microphone
(mono)
microphone
(mono)
CH1
XLR INPUT1
CH2**
INPUT2
Internal
microphone
(mono)
microphone
(mono)
CH1
XLR INPUT2
CH2**
CH2 switch
position
position
Input channel and source
INT MIC
XLR INPUT1
CH1
Internal
microphone
(mono)
microphone
(mono)
CH2**
INPUT1
XLR INPUT1
CH1
CH2**
INPUT2
XLR INPUT1
CH1
XLR INPUT2
CH2**
* The recording level of channel 2 is
synchronized with that of channel 1 when only
the internal microphone is used. The recording
level of channel 2 is controlled with the CH1
(AUDIO LEVEL) dial and the CH1 (AUTO/
MAN) switch.
the internal microphone is used. The recording
level of channel 2 is controlled with the CH1
(AUDIO LEVEL) dial and the CH1 (AUTO/
MAN) switch.
** You can adjust the recording levels of channel 1
and channel 2 separately.
Adjusting the volume