Sony HDR-HC1E Manuel D’Utilisation

HDR-HC1E 2-631-478-11(1)

 PICT.APPLI. menu (Continued)

B] and the recording setting changes to 
the registered one. Touch [BACK] to 
register again or touch [END] to finish the 
operation.

•  You cannot register the setting while recording. 
•  It takes about 4 seconds to change to the 

registered setting.

•  If you register [SHOT TRANS], the [WHITE 

BAL.] setting is also registered at the same 
time.

•  The recording angle varies during [SHOT 

TRANS].

•  Use the tripod because [STEADYSHOT] does 

not function.

The default setting is [ON], allowing you 
to view the demonstration in about 10 
minutes, after you have removed both a 
cassette and a “Memory Stick Duo” from 
your camcorder, and slide the POWER 
switch down to turn on the CAMERA-
TAPE lamp.

•  The demonstration will be suspended in 

situations such as those described below.
–  When you touch the screen during the 

demonstration. (The demonstration starts 
again in about 10 minutes.)

–  When a cassette or a “Memory Stick Duo” is 

inserted.

–  When the POWER switch is set to other than 

CAMERA-TAPE.

See page 69.

You can record still images on the 
“Memory Stick Duo” at a selected interval. 
This function is useful to observe the 
movement of clouds or the changes in 
daylight, etc.

[a]: Recording

[b]: Interval



  Touch 

 



 a desired interval time (1, 5 

or 10 minutes) 



 

 



 [ON] 



 

 



 

.



  Press PHOTO fully.

 

 stops flashing and the interval still 

image recording starts.

To cancel [INT.REC-STL], select [OFF] 
in step 



.

You can register the settings of focus and 
zoom and then change the recording setting 
from the current one to the registered one, 
resulting in a smooth transition of scenes 
(Shot transition).

SHOT A

SHOT B

 

Set the zoom (p. 24) and focus (p. 25) at 
the desirable setting and press [STORE-
A]. [SHOT-A] flashes and will be 
registered. Register [STORE-B] as well.

 

Touch [NEXT]



[EXEC-A] or [EXEC-