Sony DCR-SR45E Manuel D’Utilisation

Page de 36
4
 DCR-SR35E/SR36E/SR45E/SR46E/SR55E/SR65E/SR75E/SR85E 
PartNumber:  4-109-555-11(1) 
 Note
Th
  is equipment has been tested and found 
to comply with the limits for a Class B 
digital device, pursuant to Part 15 of the 
FCC Rules.
Th
  ese limits are designed to provide 
reasonable protection against harmful 
interference in a residential installation. 
Th
  is equipment generates, uses, and 
can radiate radio frequency energy and, 
if not installed and used in accordance 
with the instructions, may cause harmful 
interference to radio communications.
However, there is no guarantee that 
interference will not occur in a particular 
installation. If this equipment does cause 
harmful interference to radio or television 
reception, which can be determined 
by turning the equipment off  and on, 
the user is encouraged to try to correct 
the interference by one or more of the 
following measures:
  Reorient or relocate the receiving antenna.
  Increase the separation between the 
equipment and receiver.
  Connect the equipment into an outlet on 
a circuit diff erent from that to which the 
receiver is connected.
  Consult the dealer or an experienced radio/
TV technician for help.
Th
  e supplied interface cable must be used 
with the equipment in order to comply 
with the limits for a digital device pursuant 
to Subpart B of Part 15 of FCC Rules.
 Battery  pack
Th
  is device complies with Part 15 of the 
FCC Rules. Operation is subject to the 
following two conditions:(1) Th
 is device 
may not cause harmful interference, and 
(2) this device must accept any interference 
received, including interference that may 
cause undesired operation. 
 Notes on use
 Supplied items
Th
  e numbers in ( ) are the supplied 
quantity.
  AC Adaptor (1)
  Power cord (Mains lead) (1)
  Handycam Station (1)  (DCR-SR55E/SR65E/
SR75E/SR85E)
  A/V connecting cable (1) 
  USB cable (1) 
  Wireless Remote Commander (1) (DCR-
SR55E/SR65E/SR75E/SR85E)
A button-type lithium battery is already 
installed.
  Rechargeable battery pack NP-FH40 (1) 
 
  21-pin adaptor (1) (DCR-SR55E/SR65E/SR75E/
SR85E)
For the models with the 
 mark printed on 
their bottom surfaces only. 
 
  CD-ROM “Handycam Application Soft ware” 
(1) (p. 25)
  Picture Motion Browser (Soft ware)
   PMB  Guide
  Handycam Handbook (PDF)
  “Operating Guide” (Th
  is manual) (1)  
 
 
 
Using the camcorder
  Th
  e camcorder is not dustproofed, dripproofed 
or waterproofed. See “Precautions” (p. 31).
  Do not do any of the following when the 
 (movie)/
 (still image) lamps (p. 11) or 
ACCESS lamps (p. 13, 18) is lit or fl ashing. 
Otherwise the media may be damaged, recorded 
images may be lost or other malfunctions could 
occur.
  Remove the “Memory Stick PRO Duo.”
  Remove the battery pack or AC Adaptor from 
the camcorder.
  Apply mechanical shock or vibration to the 
camcorder.
  When connecting your camcorder to another 
device with a cable, be sure to insert the 
connector plug in the correct way. Pushing the 
plug forcibly into the terminal will damage the 
terminal
your cam
 Do not a
camcord
not be re
may not 
 Do not u
Th
 e hard
recogniz
 To prote
by dropp
function
gravity c
this func
also be r
drop rep
stopped.
 When th
becomes
may not 
camcord
camcord
In this ca
screen (p
 Do not t
area, wh
meters (
hard disk
  If you re
long tim
media. Im
such a ca
external 
FORMA
 
 Fasten th
correctly
 
 To adjus
90 degre
to the be
You can 
the lens