Sony EVI-H100S Manuel D’Utilisation
Notes
Use only the AC power adaptor (JEITA type4)
supplied with the unit. Do not use any other AC
power adaptor.
Polarity of the plug
You have to set the video format of the signal to be
output from the camera. For detailed information on
how to set the video format, see “ SYSTEM
SELECT switch” on page 7.
Do not make VISCA RS-232C and RS-422
connections at the same time, as this may cause
malfunctions.
EVI-H100V
1) When the camera is connected to a computer with a VISCA cable (cross type, RS-232C), you can operate the
camera with the computer. To obtain a cable, consult the dealer where you bought your camera.
2) For details on how to connect using VISCA RS-422, see page 28.
DVI to
component
adapter cable
(not supplied)
to component
input
connector
to VIDEO OUT
DVI cable
(not supplied)
to VIDEO OUT
to DVI input connector
VISCA cable (not supplied)
1)
to VISCA IN
to RS-232C
to VISCA OUT
To VISCA IN of other
EVI-H100S/H100V
(when connecting
to more than one
camera)
to VISCA RS-422
2)
to DC 12V
AC power adaptor (supplied)
Power cord (supplied)
to AC outlet
Computer with serial
communication
interface, HD video
monitor with DVI input
interface, etc.