Sony DSR250P Manuel D’Utilisation
Editing
99
Recording video or TV programs
You can connect only one VCR using the DV connecting cable (i.LINK cable)
When you dub a picture in digital form
The colour of the display may be uneven. However this does not affect the dubbed
picture.
The colour of the display may be uneven. However this does not affect the dubbed
picture.
If you record a still picture in playback pause mode via the DV IN/OUT connector
The recorded picture becomes rough. And when you play back the picture using your
camcorder, the picture may jitter.
The recorded picture becomes rough. And when you play back the picture using your
camcorder, the picture may jitter.
Before recording
Set the DISPLAY switch located on the front of the viewfinder to ON and make sure
that the DV IN indicator appears on the LCD screen or in the viewfinder. The DV IN
indicator may appear on both pieces of equipment.
Set the DISPLAY switch located on the front of the viewfinder to ON and make sure
that the DV IN indicator appears on the LCD screen or in the viewfinder. The DV IN
indicator may appear on both pieces of equipment.
On the commander mode
Your camcorder works in the commander mode, VTR 2. Commander modes 1, 2 and 3
are used to distinguish your camcorder from other Sony VCRs to avoid remote control
misoperation. If you use another Sony VCR in the commander mode VTR 2, we
recommend changing the commander mode or covering the sensor of the VCR with
black paper.
Your camcorder works in the commander mode, VTR 2. Commander modes 1, 2 and 3
are used to distinguish your camcorder from other Sony VCRs to avoid remote control
misoperation. If you use another Sony VCR in the commander mode VTR 2, we
recommend changing the commander mode or covering the sensor of the VCR with
black paper.