Sony DCR-DVD200E Manuel D’Utilisation

-GB

z

AUTO

ON

To display the remaining capacity of the disc in
the following cases for example:
• For 8 seconds after setting the power on and

the mode dial to 

 (Movie) or 

 (Still)

• For 8 seconds after recognising the inserted

disc into your camcorder in 

 (Movie) or 

(Still)

• For 8 seconds when set the display to on by

pressing DISPLAY/BATT INFO in 

 (Movie)

or 

 (Still)

• When the remaining capacity of the disc is less

than 5 minutes in 

 (Movie) or 20 in 

 (Still)

• For 8 seconds when starting recording from

the line input

To always display the remaining capacity of the
disc

 Movie
 Still

 Play/Edit

Notes
•If you press DISPLAY/BATT INFO with [DISPLAY] set to [V-OUT/LCD] in the SETUP display,

the picture from a TV or VCR will not appear on the LCD display even when your camcorder is
connected to outputs on the TV or VCR.

•If more than 5 minutes passes after removing the power source, the [PROGRAM AE], [FLASH

LVL], [WHT BAL], [COMMANDER], and [HiFi SOUND] settings are returned to their factory
settings. Other settings are held in memory even when the battery is removed.

Tip
When recording a close subject, if [REC LAMP] is set to [ON], the red camera recording lamp on
the front of the camcorder may reflect on the subject if it is close. In this case, it is recommended to
set [REC LAMP] to [OFF].