Sanyo VPC-GH3PX Manuel D’Utilisation
147
English
For Windows 2000 users (except for the SDXC card)
Mounting your camera
1
Set the camera to the card reader mode (page 143).
h If a message appears on the computer monitor instructing you to load
h If a message appears on the computer monitor instructing you to load
the Windows CD-ROM, follow the instructions and install the driver.
h The camera is recognized as a drive, and [Removable disk] appears in
the [My Computer] window.
h The card is recognized (mounted) as a disk.
Dismounting the camera
CAUTION
i To disconnect your camera, be sure to follow the procedure below. Failure
to follow this procedure may cause faulty operation of your computer or
loss of card data.
loss of card data.
1
Left-click on [Unplug or Eject Hardware] in the task tray.
h A list appears showing the devices connected to the computer’s USB
h A list appears showing the devices connected to the computer’s USB
connector.
2
Left-click on the camera drive.
h The [Safe to Remove Hardware] dialog box will open.
h The [Safe to Remove Hardware] dialog box will open.
3
Click on the [OK] button.
h You can now disconnect the camera.
h You can now disconnect the camera.