Sanyo VCC-ZM300 Manuel D’Utilisation
OPTION SETTING
c
Operation of alarm signal output to the System
Controller setting (LINE OUT)
Controller setting (LINE OUT)
Outputs alarm signal to the System Controller. The ALARM lamp
on the System Controller will blink when it receives an alarm
signal. An alarm list can be displayed to show information such as
date/time alarm was received, the device sending the alarm and
the alarm type.
on the System Controller will blink when it receives an alarm
signal. An alarm list can be displayed to show information such as
date/time alarm was received, the device sending the alarm and
the alarm type.
Use the cursor button (j or l) to move the cursor to LINE
OUT, then use the cursor button (d or c) to select the
“ON” or “ OFF”.
OUT, then use the cursor button (d or c) to select the
“ON” or “ OFF”.
Available settings:
•
ON: Outputs alarm signal to the System Controller
•
OFF: Does not output alarm signal to the System Controller
☞
To close the menu screen or return to the previous
screen, select BACK or END for MENU and press the SET
button.
screen, select BACK or END for MENU and press the SET
button.
1
ALARM SETTING
ALARM IN
POLARITY NO
MOTION OFF
DURATION 5S
ALARM OUT OFF
POLARITY NO
ALARM TIME 5S
LINE OUT OFF
POLARITY NO
MOTION OFF
DURATION 5S
ALARM OUT OFF
POLARITY NO
ALARM TIME 5S
LINE OUT OFF
L5AA2/US GB 2002, 5, 24
Eng
lish
50