Sanyo VCC-ZM300 Manuel D’Utilisation
CONNECTIONS
Basic connection for monitoring or recording
The peripheral devices (VCR, monitor, lens, etc.) and cables
are sold separately.
are sold separately.
1
Make the video signal connection between the camera
and the monitor or time lapse VCR.
and the monitor or time lapse VCR.
2
Power supply choices
•
Use a commercially available 24 V AC adaptor. Make sure
to use a cable with an earth line (22AWG or more) to
connect to the grouding terminal. (
to use a cable with an earth line (22AWG or more) to
connect to the grouding terminal. (
Fig.1.)
•
When using a DC 12 V power supply, make the
connections as indicated in
connections as indicated in
Fig. 2.
CAUTION:
To prevent camera and/or power supply failure, pay close
attention to polarity when making the connections.
attention to polarity when making the connections.
3
Insert the plug of this power supply into a wall outlet.
The
POWER indicator (A) will light. Adjust the picture on the
monitor using the Brightness and Contrast controls.
GND
AC24V
DC12V
CLASS 2 WIR
GND
AC24V
DC12V
CLASS 2 WIR
(Video signal connections)
: VIDEO IN
: VIDEO OUT
: VIDEO IN
: VIDEO OUT
(A)
AC 24 V connection
DC 12 V connection
Fig. 1
Fig. 2
Time lapse VCR or
Digital video recorder
(sold separately)
TV monitor
(sold separately)
L5AA2/US GB 2002, 5, 24
Eng
lish
6