Sony CCD-TR98 Manuel D’Utilisation
23
CCD-TR78/TR88/TR98 3-810-917-13.E
Replacing the Bulb
Use the Sony XB-3D halogen lamp (not supplied).
Remove the power source before replacing the bulb.
(1) While pushing the hole under the built-in light unit using a wire, remove the unit.
(2) Turn the bulb housing counterclockwise and detach from the built-in light unit.
(3) Replace the bulb using a dry cloth.
(4) Attach the bulb housing turning it clockwise, then replace the built-in light unit.
Remove the power source before replacing the bulb.
(1) While pushing the hole under the built-in light unit using a wire, remove the unit.
(2) Turn the bulb housing counterclockwise and detach from the built-in light unit.
(3) Replace the bulb using a dry cloth.
(4) Attach the bulb housing turning it clockwise, then replace the built-in light unit.
Using the Built-in Light
1
2
3
Note
To prevent the bulb from being smudged with finger prints, handle it with a dry cloth, etc. If the
bulb is smudged, wipe it completely.
To prevent the bulb from being smudged with finger prints, handle it with a dry cloth, etc. If the
bulb is smudged, wipe it completely.
CAUTION
• When replacing the bulb, use only the Sony XB-3D halogen lamp (not supplied) to reduce the risk
of fire.
• To prevent possible burn hazard, disconnect the power source before replacing and do not touch
the bulb until the bulb becomes cool enough to handle (for about 30 minutes or more).