Sony Ericsson PDW-530P Manuel D’Utilisation

103

7-1 Saving and Loading User Files to and from a “Memory Stick”

Chapter

The camcorder is equipped with a “Memory Stick” drive, 
which enables you to save user files, scene files, lens files, 
reference files and “ALL” files. You can load these files 
from the “Memory Stick” for immediate recall of a 
particular setting configuration.
When a menu page is displayed, you can set up the 
camcorder so that inserting a “Memory Stick” 
automatically jumps to the appropriate file-related menu 
page.

For details about scene files, see 7-2 “Saving and Loading 
Scene Files” on page 107.
For details about lens files, reference files and “ALL” 
files, refer to the Maintenance Manual.
For details of the function for jumping to the appropriate 
file-related menu page, see 7-3 “Jumping to a File-Related 
Menu Page When Inserting a “Memory Stick”” on page 
112.

With this camcorder, you can use “Memory Sticks” whose 
capacity does not exceed 128 MB.

The “Memory Stick” can be inserted to or removed from 
the camcorder with the power turned on or off.

Proceed as follows.

Open the cover of the menu operating section.

The “Memory Stick” slot is now visible.

Hold the “Memory Stick” with the notch facing 
downward and the arrow facing away from you, and 
insert the “Memory Stick” into the “Memory Stick” 
slot until it clicks into place. Then close the cover.

Inserting the “Memory Stick”

If it does not fit into the slot properly or if there is some 
resistance when you insert it, the “Memory Stick” may be 
turned around or upside down. Do not force the “Memory 
Stick” into the slot. Confirm the direction of the notch and 
arrow on the “Memory Stick” before inserting the 
“Memory Stick”, and then try inserting it again.

“Memory Stick”