Sony Ericsson PDW-530P Manuel D’Utilisation
113
8-1 Power Supply
Chapter
8
Setting Up the
Camcorder
8-1 Power Supply
The following power supplies can be used with the
camcorder.
• BP-IL75/GL95 Lithium-ion Battery Pack
• BP-M100 Nickel Metal Hydride Rechargeable Battery
camcorder.
• BP-IL75/GL95 Lithium-ion Battery Pack
• BP-M100 Nickel Metal Hydride Rechargeable Battery
Pack
• AC power using the AC-550/550CE or AC-DN2B AC
adaptor
8-1-1 Using a Battery Pack
When a BP-IL75 Battery Pack is used, the camcorder will
operate continuously for about 90 minutes. Before use,
charge the battery pack with a BC-M150 Battery Charger.
It takes about 140 minutes to charge one BP-IL75.
operate continuously for about 90 minutes. Before use,
charge the battery pack with a BC-M150 Battery Charger.
It takes about 140 minutes to charge one BP-IL75.
For details, refer to the battery charger operation manual.
When a BP-M100 Battery Pack is used, the camcorder will
operate for about 120 minutes. Before use, charge the
battery pack with a BC-M50 Battery Charger. It takes
about 240 minutes to charge one BP-M100.
operate for about 120 minutes. Before use, charge the
battery pack with a BC-M50 Battery Charger. It takes
about 240 minutes to charge one BP-M100.
For details, refer to the battery charger operation manual.
A warm battery pack may not be able to be fully recharged.
Attaching the battery pack
1
Press the battery pack against the back of the
camcorder, aligning the line on the side of the battery
pack with the matching line on the camcorder.
camcorder, aligning the line on the side of the battery
pack with the matching line on the camcorder.
2
Slide the battery pack down until its “LOCK” arrow
points at the matching line on the camcorder.
points at the matching line on the camcorder.
Note on using the battery pack
Back of camcorder
BP-IL75/GL95/
M100
M100
Align these
lines.
lines.
“LOCK”
arrow
arrow
Matching line on
the camcorder
the camcorder