Manualsbrain.com
  1. Manuels
  2. Marques
  3. Sony Ericsson
  4. PDW-530P
  5. Manuel D’Utilisation

Sony Ericsson PDW-530P Manuel D’Utilisation

Télécharger
Page de 168
59
5-1 Setting the Recording Format (PDW-530/530P only)
Chapter
5
Adjustments and
Settings for Recording
5-1 Setting the 
Recording Format 
(PDW-530/530P only)
Before recording with the PDW-530/530P, it is necessary 
to set the recording format for each of video and audio.
Video recording format: MPEG IMX 50 Mbps, 40 Mbps, 
30 Mbps, or DVCAM
Audio recording format: 16-bit 48 kHz or 24-bit 48 kHz
Note
It is not possible to combine different recording formats on 
a single disc.
5-1-1 Setting the Video Recording 
Format
You can select the video recording format in a menu, from 
MPEG IMX 50 Mbps, MPEG IMX 40 Mbps, MPEG IMX 
30 Mbps, and DVCAM.
The factory default selection is “IMX50”.
To select the desired video recording format, proceed as 
follows.
1
Turn on the POWER switch.
2
Holding down the MENU knob, move the MENU ON/
OFF switch from OFF to ON.
The TOP menu appears.
3
Turn the MENU knob to move the 
b mark to 
“MAINTENANCE”.
4
Press the MENU knob.
If this is the first time the MAINTENANCE menu has 
been displayed, the CONTENTS page of the 
MAINTENANCE menu appears. If the menu has been 
used before, the last accessed page appears.
5
If the CONTENTS page is displayed, turn the MENU 
knob to move the 
b mark to “VDR MODE”, and press 
the MENU knob to display the VDR MODE page.
If a different page is displayed, turn the MENU knob 
until the VDR MODE page appears, then press the 
MENU knob to select the page.
     <TOP MENU>
 USER
 USER MENU CUSTOMIZE
 ALL
  OPERATION
  PAINT
  MAINTENANCE
  FILE
  DIAGNOSIS
     <TOP MENU>
 USER
 USER MENU CUSTOMIZE
 ALL
  OPERATION
  PAINT
  MAINTENANCE
  FILE
  DIAGNOSIS