Sony Ericsson PDW-530P Manuel D’Utilisation

Chapt

Dis
p

Det

iled

S
e

ttin

6-3 Adjustments and Settings from Menus

1) Even when the MARKER item is set to “OFF” on the MARKER page of

the USER menu, the ASSIGN 2 switch allows you to display or not to
display all markers.

2) When the CBK-SC01 is not installed, this item does not appears since this

function is not effective.

3) This does not appear if nothing is assigned in the Assign menu.

Note

For functions that are assigned to the ASSIGN 2
switch, you cannot change those settings using other
menus. The function assigned to ASSIGN 2 switch
takes precedence over the menu setting.

Turn the MENU knob to move the

b mark to the item

you want to set, and press MENU knob.

The

b mark changes to a z mark, and the z mark by

the setting changes to a ? mark.

Turn the MENU knob to switch to the desired setting,
and press the MENU knob.

The z mark changes to back a

b mark, and the ? mark

by the setting changes back to a z mark, confirming
the setting.

To continue with other settings, repeat steps 3 and 4.

To return to the FUNCTION 1 page
Turn the MENU knob to move the

b mark to “ESC” at the

right top of the window and press the MENU knob.
Alternatively, push the CANCEL/PRST / ESCAPE switch
down to the ESCAPE side.

To end the menu operation
Set the MENU ON/OFF switch to OFF or close the cover
of the menu operating section.

Operation of the ASSIGN 1/2/3/4 when UA01 to
UA10 are assigned
When an on/off switchable function (or menu item) is
assigned to one of the ASSIGN 1/2/3/4 switches, each time
the switch is pressed toggles the function on or off.
When another type of menu item is assigned, pressing the
switch displays the item and its setting value on the screen.
You can then change the setting by pressing and turning
the MENU knob.
The viewfinder display disappears approximately three
seconds after the last operation.

6-3-6 Setting the Date/Time of the

Internal Clock

You can set or change the date and time of the internal
clock. The date and time set are reflected in the time code.
Proceed as follows.

Holding down the MENU knob, move the MENU ON/
OFF switch from OFF to ON.

The TOP menu appears.

Turn the MENU knob to move the

b mark to

“DIAGNOSIS”, and press the MENU knob.

If this is the first time the DIAGNOSIS menu has been
displayed, the CONTENTS page appears. If the menu
has been used before, the last accessed page appears.

If the CONTENTS page is displayed, turn the MENU
knob to move the

b mark to “TIME/DATE”, and press

the MENU knob to display the TIME/DATE page.

If a different page is displayed, turn the MENU knob
until the TIME/DATE page appears, then press the
MENU knob to select the page.

The

b mark is placed at “ADJUST”.

Press the MENU knob.

The TIME ADJUST setting window appears.

This window contains the following items.

REC VIDEO
SOURCE

Selects which signals you will record
pictures being shot by the camcorder or
video signals from external equipment
connected to GENLOCK IN connector.

UA01 to UA10

Assigns the items assigned in the
ASSIGN SEL menu.

Function

Content

Item

Description

HOUR

Sets the hour value.

MIN

Sets the minutes value.

SEC

Sets the seconds value.

YEAR

Sets the year.

04 TIME/DATE

ADJUST : EXEC

HOUR : 12

MIN : 55

SEC : 58

YEAR : 00

MONTH : 07

DAY : 31

TIME ADJUST ESC