Hitachi hdc-401ex Manuel D’Utilisation
●
Always check the clock display after switching the power source. The internal
clock is backed up for approximately 10 minutes, but the date and time
setting may be cleared depending on how long the batteries have been in use.
clock is backed up for approximately 10 minutes, but the date and time
setting may be cleared depending on how long the batteries have been in use.
●
The date/time and display mode you have just set is retained even after the
power is turned off or Setting to the Default
power is turned off or Setting to the Default
is executed.
Adjusting the Date and Time
21
22
Set the hours and minutes using the control
panel. Once the minutes are set, press
panel. Once the minutes are set, press
.
【
M】
【
N】：Increase and decrease.
【
O】
【
P】
：Move through the items and confirm the set value.
4
Use【
M】
【
N】to select the part of Mode
you want to set, and then press
.
Select Exit using【
M】
【
N】and then press
.
5
7
6
Select the desired display mode using【
M】
【
N】and then press
.
YYYY/MM/DD/24 hr: The year, month, day and hours (in 24-hour format) are displayed in this order.
YYYY/MM/DD/12 hr: The year, month, day and hours (in 12-hour format) are displayed in this order.
DD/MM/YYYY/24 hr: The day, month, year and hours (in 24-hour format) are displayed in this order.
DD/MM/YYYY/12 hr: The day, month, year and hours (in 12-hour format) are displayed in this order.
MM/DD/YYYY/24 hr: The month, day, year and hours (in 24-hour format) are displayed in this order.
MM/DD/YYYY/12 hr: The month, day, year and hours (in 12-hour format) are displayed in this order.
YYYY/MM/DD/12 hr: The year, month, day and hours (in 12-hour format) are displayed in this order.
DD/MM/YYYY/24 hr: The day, month, year and hours (in 24-hour format) are displayed in this order.
DD/MM/YYYY/12 hr: The day, month, year and hours (in 12-hour format) are displayed in this order.
MM/DD/YYYY/24 hr: The month, day, year and hours (in 24-hour format) are displayed in this order.
MM/DD/YYYY/12 hr: The month, day, year and hours (in 12-hour format) are displayed in this order.
Date & Time
Exit
Date： 2004 / 04 / 13
Time： 16：07
Mode： YYYY/MM/DD 24hr
Date & Time
Exit
Date： 2004 / 04 / 13
Time： 16：07
Mode： YYYY/MM/DD 24hr
In the Still Image Capture mode, press
MENU in to display the Capture Menu
screen.
MENU in to display the Capture Menu
screen.
1
In the Capture Menu screen, select Setup
using【
using【
M】
【
N】and then press
.
The Setup menu is displayed.
You can also select Setup from Video Capture
Menu and Playback Menu.
Menu and Playback Menu.
2
OK：
Set
Capture Menu
Set To Default
Video Clip Mode
Image size
Image quality
Video Clip Mode
Image size
Image quality
2304×1728
Normal
In the Setup menu, select Date & Time
using【
using【
M】
【
N】and then press
.
The date/time setting screen is displayed.
3
Setup
Exit
Set To Default
Date & Time
TV
Set To Default
Date & Time
TV
NTSC
OK：
Set
Follow the same procedure described earlier to adjust the date
and time.
and time.
4
Date & Time
Exit
Date： 2004 / 04 / 13
Time： 16：07
Mode： YYYY/MM/DD 24hr
Capture Menu
Date Imprint
Setup
Exit
Setup
Exit
Off
OK：
Set
P25
Getting
R
eady
Basic
Operations