Hitachi VM-E220A Manuel D’Utilisation

No picture appears on television 
screen when"PLAY" is pressed. (TV is 
connected to the camcorder by using 
RF output adapter.) 

§ Set the television to the camcorder 

channel (3 or 4) depending upon the 
selected channel in the RF channel 
select switch of RF output adapter. 

Interference on playback picture. (TV is 
connected to the camcorder by using 
RF output adapter.) 

§ When you see the playback picture 

on your TV adjust fine tuning knob 
on television set to obtain best 
picture. 

§ Color of your TV screen is too bright, 

too faint or  

§ TV set has VIR circuit. Turn it off 

during playback. 

Picture bends at the top of the TV 
screen. 

§ TV receiver is of older type. It needs 

to be modified to work properly with 
camcorder. 

§ Tape is damaged. Try another 

cassette. 

§  

Date search function does not operate 

§ Slide the CAM/OFF VIDEO switch to 

VIDEO. 

§ Insert the clock battery, set the date 

and time, then start recording. 

§ Do not remove the clock battery after 

recording. 

§ Do not eject the recorded cassette. 

Leave it in the camcorder. 

The playback picture moves rapidly 
and noise appears. Also sound 
speeded up from normal is heard. 

§ The camcorder is set to the double 

speed playback mode. Pressing the 
playback button to restore the 
normal playback mode. The sound 
also returns to the normal speed 
Noise appears in the picture during 
double speed playback, but this does 
not indicate a fault. See  page 30 for 
details. 

 

The (

) indication in the electronic 

viewfinder flashes to indicate battery is 
discharged. 

§ Try another battery or charge the 

battery.