Hitachi DZ-GX5100SW Manuel D’Utilisation
En
g
g
lish
30
Turning DVD Video Camera/Recorder On and
Off
Off
While holding down the grey button at the right
of power switch, set the switch according to
each recording function:
of power switch, set the switch according to
each recording function:
Power ON status
During playback, set the power switch to “!”
or “ ” when using disc, or set it to “"” when
using card.
or “ ” when using disc, or set it to “"” when
using card.
Note
:
• Once you turn the DVD video camera/recorder on to
let it recognise the disc, you can immediately record
or play back by turning the DVD video camera/
recorder on again. However, if a long time has
elapsed after the disc was inserted, it will take some
time for the DVD video camera/recorder to start
because it must recognise the disc again (see
“Troubleshooting” on page 137).
or play back by turning the DVD video camera/
recorder on again. However, if a long time has
elapsed after the disc was inserted, it will take some
time for the DVD video camera/recorder to start
because it must recognise the disc again (see
“Troubleshooting” on page 137).
• It will take some time for the DVD video camera/
recorder to display the Disc Navigation screen after
power is turned on.
power is turned on.
• When the DVD video camera/recorder is turned on,
the self-diagnosis function will work and a message
may appear. In this case, refer to “Trouble Messages”
on page 131 and take corrective action.
may appear. In this case, refer to “Trouble Messages”
on page 131 and take corrective action.
Set to “OFF”:
The DVD video camera/
recorder will turn off
recorder will turn off
Set to “
"”:
To record still on SD
memory card
memory card
Set to “
!”:
To record movie on DVD-
RAM/DVD-RW/DVD-R/
+RW disc
RAM/DVD-RW/DVD-R/
+RW disc
Set to “
”:
To record still on DVD-
RAM disc
RAM disc
Power switch
Turn the switch while
holding down the grey
button at the right of
switch.
holding down the grey
button at the right of
switch.