Sony BDVN5200W Manuel D’Utilisation
52
US
BDV-N9200W/BDV-N7200W/BDV-N5200W
4-485-799-12(1)
D:\NORM'S JOB\SONY HA\SO130077\BDV-N9200_7200_5200_E3200
(PMRF 01)\4485799121_US (U2)\080OTH.fm
(PMRF 01)\4485799121_US (U2)\080OTH.fm
masterpage: Left
[Secure Link]
You can specify the wireless connection
to link the main unit to the surround
amplifier using the Secure Link function.
This function can help prevent
interference if you use multiple wireless
products or your neighbors use wireless
products.
to link the main unit to the surround
amplifier using the Secure Link function.
This function can help prevent
interference if you use multiple wireless
products or your neighbors use wireless
products.
1
2
Press V/v to select [Secure Link],
then press
then press
.
3
Press V/v to select [On], then
press .
press .
4
Press SECURE LINK on the rear of
the surround amplifier.
Proceed to the next Step within a
few minutes.
the surround amplifier.
Proceed to the next Step within a
few minutes.
5
Press B/b to select [Start], then
press .
To return to the previous display,
select [Cancel].
press .
To return to the previous display,
select [Cancel].
6
After the message [Secure Link
setting is complete.] appears,
press .
The surround amplifier is linked to
the main unit and the LINK/
STANDBY indicator turns orange.
If the message [Cannot set Secure
Link.] appears, follow the on-screen
messages.
setting is complete.] appears,
press .
The surround amplifier is linked to
the main unit and the LINK/
STANDBY indicator turns orange.
If the message [Cannot set Secure
Link.] appears, follow the on-screen
messages.
To cancel the Secure Link function
For the main unit
Select [Off] on Step 3 above.
For the surround amplifier
Hold down SECURE LINK on the rear of
the surround amplifier until the LINK/
STANDBY indicator turns green or
flashes green.
the surround amplifier until the LINK/
STANDBY indicator turns green or
flashes green.
[RF Band]
You can select the frequency bandwidth
which [RF Channel] belongs to.
which [RF Channel] belongs to.
1
2
Press V/v to select [RF Band], then
press .
press .
3
Press V/v to select the setting you
want, then press
want, then press
.
• [Auto]: Normally select this. The
system automatically selects the
strongest frequency bandwidth
for transmission.
strongest frequency bandwidth
for transmission.
• [5.2GHz], [5.8GHz]: The system
transmits sound according to the
selected frequency bandwidth.
selected frequency bandwidth.
We recommend you to set [RF Band] to
[Auto].
[Auto].
Activating wireless
transmission between
specific units
transmission between
specific units
Selecting the frequency
bandwidth
bandwidth
Tip