Samsung BDF5700 Manuel D’Utilisation

Wireless Network

 

✎

NOTES

 ` If your wireless router supports DHCP, this player can use a DHCP or static IP address to connect to the wireless 

network.

 ` Set your wireless router to Infrastructure mode. Adhoc mode is not supported.
 ` The player supports only the following wireless security key protocols:

 - WEP (OPEN/SHARED), WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES)

 ` Select a channel on the wireless router that is not currently being used. If the channel set for the wireless router is 

currently being used by another device nearby, it will result in interference and communication failure.

 ` In compliance with the newest Wi-Fi certification specifications, Samsung Blu-ray players do not support WEP or 

TKIP security encryption in networks running in the 802.11n mode.

 ` Wireless LAN, by its nature, may cause interference, depending on the operating conditions (router performance, 

distance, obstacles, interference by other radio devices, etc).

Broadband service

Wireless Router

Settings

•  The Home screen will not appear if you do not 

configure the initial settings.

•  The OSD (On Screen Display) may change in this 

player after you upgrade the software version.

•  The access steps may differ depending on the 

menu you selected.

•  After the initial settings process is complete, you can 

then operate the panel buttons and remote control.

The Initial Settings Procedure appears when 

you turn on player for the first time and lets you 

set the OSD and menu languages, configure 

the connection to your home network, and 

choose the aspect ratio output (screen size 

and format) that is correct for your TV. Follow 

the directions that appear on the screen.

 

✎

NOTES

 ` The Home menu will not appear if you do not 

configure the initial settings except as noted below.

 ` If you press the BLUE (D) button during 

network setup, you can access the Home menu 

even if the network setup is not completed yet.

 ` When you return to the Home menu, the full 

screen mode is cancelled automatically.

 ` If you want to display the Initial Setting screen 

again to make changes, press the @ button on 

the front panel of the player for more than 5 

seconds with no disc inserted. This resets the 

player to its default settings.

 ` After the initial settings process is complete, you 

can operate the HDMI-CEC function.

 ` If you want to use the Anynet+(HDMI-CEC) 

function to aid in the initial set up process, 

please follow the instructions below.

1) Connect the player to an Anynet+(HDMI-

CEC) compliant Samsung TV using HDMI Cable.

2) Set the Anynet+(HDMI-CEC) feature to On in 

both the TV and the player.

3) Set the TV to the Initial Settings Procedure.

 ` If you leave the player in the stop mode for 

more than 5 minutes without using it, a screen 

saver will appear on your TV. If the player is 

left in the screen saver mode for more than 25 

minutes, the power will automatically turn off.

HOME Button : Press to move to the Home 

menu.

RETURN Button : Return to the previous menu.

 (Enter) / DIRECTION Button :  

Move the cursor or select an item. 

Activate the currently selected item. 

Confirm a setting.

EXIT Button : Press to exit the current menu.

•  Home menu

No Disc       a Change Device                                  d View Devices    " Enter

Videos

Netflix

VUDU

Pandora

CinemaNow

Photos

Music

Settings

SCREEN

VIEW

A-B

FULL

BONUS REPEAT REPEAT