Samsung BD-J5900 Manuel D’Utilisation

When you connect this player to a 

network, you can use network based 

applications and functions such as BD-

LIVE (see page 17), Netflix, Pandora, 

and YouTube (see pages 24~26). You 

can also use the network connection 

to upgrade the player's software (see 

page 19). Instructions for configuring 

the network connection start below.

Before you begin, contact your ISP to find 

out if your IP address is static or dynamic. 

If it is dynamic, and you have a wired or 

wireless network, we recommend using 

the Automatic configuration procedures 

described below. 
If you are connecting to a wired 

network, connect the player to your 

router using a LAN cable before you 

start the configuration procedure. 

If you are connecting to a wireless 

network, disconnect any wired 

network connections before you begin. 

To begin configuring your network 

connection, follow the steps 

beginning in the next column.

Blu-ray Discs may include three audio streams :

Main Feature Audio : The audio 

 

-

soundtrack of the main feature.
BONUSVIEW audio : An additional 

 

-

soundtrack such as the director or actor’s 
commentary.
Navigation Sound Effects : When you 

 

-

choose a menu navigation selection, a 
Navigation Sound Effect may sound. 
Navigation Sound Effects are different 
on each Blu-ray Disc.

✎

Be sure to select the correct Digital 

 

■

Output or you will hear no sound or 
just loud noise.
If the HDMI device (AV receiver, TV) 

 

■

is not compatible with compressed 
formats (Dolby Digital, DTS), the 
audio signal outputs as PCM.
Regular DVDs do not have 

 

■

BONUSVIEW audio and Navigation 
Sound Effects.
Some Blu-ray Discs do not have 

 

■

BONUSVIEW audio and Navigation 
Sound Effects.
I

 

■

f you play MPEG audio soundtracks, 

the audio signal outputs as PCM 
regardless of your Digital Output 
selections (PCM or Bitstream).
If your TV is not compatible with 

 

■

compressed multi-channel formats 
(Dolby Digital, DTS), the player may 
output PCM 2ch downmixed audio 
even though you selected Bitstream 
(either Re-encoded or Unprocessed) 
in the setup menu.
If your TV is not compatible with 

 

■

PCM sampling rates over 48kHz, 
the product will output at 48kHz 
downsampled PCM audio even 
though you set PCM Downsampling 
to Off.

Lets you choose to have 96KHz PCM 
signals downsampled to 48KHz 
before they are outputted to an 
amplifier. Choose On if your amplifier 

or receiver is not compatible with a 
96KHz signal.

Lets you apply dynamic range control 

to Dolby Digital, Dolby Digital Plus, 

and Dolby TrueHD audio.

 

●

 : Automatically controls the 

dynamic range of Dolby TrueHD 

audio, based on information in the 

Dolby TrueHD soundtrack. 

Also turns dynamic range control on 

for Dolby Digital and Dolby Digital Plus.
Off

 

●

 : Leaves the dynamic range 

uncompressed, letting you hear the 

original sound.
On

 

●

 : Turns dynamic range control 

on for all three Dolby formats. 

Quieter sounds are made louder 

and the volume of loud sounds is 

reduced.

Lets you select the multi-channel 

downmix method that is compatible 

with your stereo system. You can choose 

to have the player downmix to normal 

stereo or to surround compatible stereo.

 

Ğ

In the Home screen, select 

Settings, 

and then press the v button.
Select 

Network, and then press 

the v button.
Select 

Network Settings, and then 

press the v button.
Select 

Wired in the Network 

Settings screen, and then press 

the v button.
Select the 

Connect button, 

and then press the v button. 

The product detects the wired 

connection, verifies the network 

connection, and then connects to 

the network.

 

Ğ

If you have a static IP address or 

the Automatic procedure does not 

work, you'll need to set the Network 

Settings values manually.
Follow Steps 1 and 2 in Wired - 

Automatic, and then follow these 

steps:

Select 

Network Status. The player 

searches for a network, and then 
displays the connection failed 
message.
On the bottom of the screen, 

select Ip Settings, and then press 

the v button.  

The IP Settings screen appears.