Samsung BD-C7900 Manuel D’Utilisation

English

05
Setup

DTS Neo:6

You can enjoy multi-channel sound from a simple 

2-channel audio source.

Off : Outputs a 2-channel audio signal through 

the front speakers only.

Cinema : Outputs 2-channel movie sound over 

multi-channels.

Music : Outputs 2-channel music over multi-

channels.

NOTE

If you are using an HDMI receiver, this option is 

available when you set Digital Output setup to PCM.

HDMI Audio Output

Set the audio output method when a receiver is 

connected to the player.

Auto : If the HDMI OUT 1 and HDMI OUT 2 

terminals are connected to a TV and receiver 

respectively, you will hear audio through the 

device connected to HDMI OUT 2. 

If the receiver is not connected to the player or 

turned off, you will hear audio through the TV 

speakers.

HDMI 1 & HDMI 2 : You can listen to the audio 

from both the receiver and TV speakers.

Audio Sync

In some cases when the player is connected to a 

digital TV, the audio signal may not synchronize 

with the video signal. If this occurs, adjust the 

audio delay time to match the video signal.

You can set the audio delay time between 0 

msec and 200 msec.  

Adjust it to the optimal setting.

NOTE

The audio delay time you specify may not be exact 

depending on the played content.

•

•

•

✎

▪

•

•

•

✎

▪

HDMI

If your TV is not compatible with compressed 

multi-channel formats (Dolby Digital, DTS), the 

player may output PCM 2ch downmixed audio 

even though you set Bitstream (either Re-

encode or Audiophile) on your setup menu.

If your TV is not compatible with PCM sampling 

rates over 48kHz, the player may output 48kHz 

downsampled PCM audio even though you set 

PCM Downsampling to Off.

Dynamic Range Control

You can listen at low volumes but still hear dialog 

clearly. 

This is only active when a Dolby Digital signal is

detected.

Auto : The Dynamic Range Control will be set 

automatically based on the information provided 

by the Dolby TrueHD Soundtrack.

Off : Turn Dynamic Range Control off.

On : Choose to listen to a movie at a lower 

volume without losing clarity of dialog.

Downmixing Mode

Select whether to downmix the multi-channel 

audio into fewer channels.

Normal Stereo : Downmixes the multi-channel 

audio into two channel stereo. Choose when 

connected to equipment that does not support 

virtual surround functions such as Dolby Pro 

Logic.

Surround Compatible : Downmixes multi-

channel audio into surround compatible stereo. 

Choose when connected to equipment that 

supports virtual surround functions such as 

Dolby Pro Logic.

•

•

•

•

•

•

•