Samsung AK68-01859A Mode D'Emploi

English

Setup

Before Starting (Initial Settings)

Turn on your TV after connecting the player.

(When the player is connected to TV for the

first time, player will turn on automatically and

the Initial Settings screen will be displayed.)

Press the ▲▼ buttons to select desired

language, then press the ENTER button.
Press the ENTER button to select Start

button.

Press the ▲▼ buttons to select the desired

TV Aspect ratio, then press the ENTER

button. (See page 32)

Press the ◄► buttons to the select the

desired Network Settings: Wired, Wireless or

PBC (WPS), then press the ENTER button.

(See pages 39~42)

The Network Test will start and Initial Settings

will be completed.
Press the OK button.

The home menu will be displayed. (For more

information about home menu, please see

page 31)

Home Menu

NOTE

When the player is connected to TV for the first time,

player will turn on automatically.

Do not confuse because this is not malfunction.
The home menu will not be displayed if you do not

configure the initial settings.
If you press the

BLUE(D) button during the network

setup, you can access the home menu even if the

network setup is not completed yet.
When you return to home menu, the full screen

mode will be cancelled automatically.
If you want to display Initial Setting screen again

in order to make changes, press the

STOP ( )

button on the front panel of the player for more than

5 seconds with no disc inserted.
Use the HDMI cable to connect the player to an

Anynet+(HDMI-CEC)-compliant Samsung TV.

If the TV uses a language supported by the player,

that language will be set to a preferred language

automatically.

However, the

Anynet+(HDMI-CEC) feature should

be set to

On in both TV and the player.

•

✎

▪

▪
▪

▪

Move " Select

Initial Settings I On-Screen Language

Select a language for the on-screen displays.

English
Français
Deutsch
Español
Italiano
Nederlands

Previous " Select

Initial Settings

TV Aspect and Network will be set.
Each setting may be changed later under "Settings"

Start

Skip < Move " Select

Initial Settings I Network

Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.

Wired : Set the network by using Ethernet cable.
Please make sure that Ethernet cable is connected.

Wired

Wireless

PBC (WPS)

internet radio

You Tube

No Disc a Change Device

View Devices " Enter

Please activate Internet@TV service

to enjoy a variety of Internet Services.