Samsung HT-H6500WM Manuel D’Utilisation

 - English

Settings

2) Set the Anynet+~(HdMI-CEC) feature to 

On in both the TV and the product.

3) Search for and then select the product 

in the TV's Anynet+~(HdMI-CEC) list. For 

more exact instructions, see the Anynet+ 
section of the TV's user's manual.

When activated, lets Samsung Call Center 
agents diagnose and fix problems with the 
product remotely. Requires an active Internet 
connection. Remote~Management service 

might not be available in some countries.

For more information about the Software~
Update function, see "Upgrading Software" on 

Lets you set the Use~Mode. If you are using the 

home theater at home, always select Home~
Use. Store~demo is for retail display settings 

only.

Provides contact information for assistance 
with your product.

Reverts all settings to their defaults except for 
the network and Smart Hub settings. Requires 
that you enter your security PIN. Press and hold 
the 123 button until the Num pad appears on the 

screen. When the Num pad appears, select a 
number using the ,.

 button and then press 

the 

 button. The default security PIN is 0000.

When you connect this product to a network, 
you can use network based applications and 
functions such as Smart Hub and BD-LIVE, and 
upgrade the product's software through the 
network connection. For more information about 
accessing and using Internet services, see the 
Network Services chapter of this manual on pages 
41~48. Instructions for configuring the network 
connection start below.

If you didn't configure your network connection 
during the initial settings procedure or you need 
to reset the network connection, follow the 
directions below.
Before you begin, contact your Internet Service 
Provider to find out if your IP address is static or 
dynamic. If it is dynamic, and you have a wired 
or wireless network, we recommend using the 
Automatic configuration procedures described 
below.
If you are connecting to a wired network, connect 
the product to your router using a LAN cable 
before you start the configuration procedure.
To begin configuring your network connection, 
follow these steps:
1.~ In the Home screen, select Settings, and then 

press the 

 button.

2.~ Select Network, and then press the 

 

button.

3.~ Select Network~Settings, and then press the 

 button. 

4.~ Go to the instructions for Wired networks 

starting below or the instructions for Wireless 
networks starting on page 21.

 

Ğ

After following Steps 1 to 3 above:
1.~ In the Network~Settings screen, change 

Network~type to Wired. Then, select Connect 

and press the 

 button. The product 

detects the wired connection, verifies the 
network connection, and then connects to 
the network.

2.~ When it is done, highlight Ok, and then 

press 

 button.