Samsung BD-ES6000/ZA Manuel D’Utilisation

Settings

1. Select Start in the Network Settings screen,

and then press the v button. The player

searches for and then displays a list of the

available networks.

2. Select the desired network, and then press

the v button.

3. Select Next, and then press the v button

again.

4. On the Security screen, enter your network's

Security Code or Pass Phrase. Enter

numbers directly using the number buttons

on your remote control. Enter letters by

selecting a letter with the ▲▼◄► buttons,

and then pressing the v button.

5. When done, select Next at the right of the

screen, and then press the v button.

6. The Network Status screen appears.

The player attempts to verify the network

connection and fails.

7. Select Ip Settings on the right of the screen,

and press the v button. The IP Settings

screen appears.

8. Select the Ip Mode field, and then set it to

Manual.

9. Use the number keypad on your remote to

enter the Network values. Use the ▲▼◄►

buttons on the remote to move from entry

field to entry field.

|NOTE |

You can get these values from your Internet provider. You

can also view these values on most Windows computers.

For instructions, see "Getting the Network Settings

Values." on page 25.

10. When done, highlight OK, and then press v

button. The Network Status screen appears.

The product verifies the network connection

and then connects to the network. When it

is done, highlight OK, and then press v

button.

WpS(pBC)

After followng Steps 1 to 3 in "Configuring Your

Network Connection" on page 24.
1. Select Start in the Network Settings screen,

and then press the v button.

The player searches for and then displays a

list of the available networks.

2. Press the WpS(pBC) button on your router

within two minutes. Your player automatically

acquires all the network settings values it

needs and connects to your network.

The Network Status screen appears. The

player connects to the network after the

network connection is verified.

Wi-Fi direct

The Wi-Fi Direct function allows you to connect

Wi-Fi Direct devices to the player and each other

using a peer-to-peer network, without a wireless

router.

|NOTE |

Some Wi-Fi Direct devices may not support the AllShare

function if connected via Wi-Fi Direct. If this is the case,

it is advisable to change the network connection method

between devices.

1. Turn on the Wi-Fi direct device and activate

its Wi-Fi Direct function.

2. In the Home screen, select Settings, and

then press the v button.

3. Select Network, and then press the v

button.

4. Select Wi-Fi direct, and then press the v

button.

The Wi-Fi Direct devices that you can

connect appear.

Display

Audio

Network

System

Support

Refresh

Wi-Fi Direct

Device Name : [BD]ES6000
Select your Wi-Fi Direct device to connect to.

AndroidXXXXXXX Disconnected

Return

English