Panasonic KX-TG7732 Manuel D’Utilisation
Using a Bluetooth wireless
headset (optional) for
landline calls
By registering a Bluetooth headset to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R 1 headset can be registered to the base
unit, you can have a hands-free conversation
wirelessly for landline calls.
Important:
R 1 headset can be registered to the base
unit. However, only one Bluetooth device
(cellular phone or headset) can be
connected to the base unit at a time.
(cellular phone or headset) can be
connected to the base unit at a time.
R For best performance, we recommend
using a Bluetooth headset within 1 m
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
(3.3 feet) of the base unit. A headset can
communicate with the base unit within a
range of approximately 10 m (33 feet).
Registering a headset to the base
unit
unit
Important:
R Make sure that the Bluetooth headset is not
R Make sure that the Bluetooth headset is not
connected to any other Bluetooth device.
1
Your headset:
Set your headset to registration mode.
R Refer to the headset operating
Set your headset to registration mode.
R Refer to the headset operating
instructions.
2
Handset:
MMENUN#621
MMENUN#621
3
Enter your headset PIN.
R Typically, default PIN is “0000”. Refer
R Typically, default PIN is “0000”. Refer
to the headset operating instructions.
4
Press MOKN, then wait until a long beep
sounds.
sounds.
5
MOFFN
R When the HEADSET indicator on the
R When the HEADSET indicator on the
base unit lights green, you are ready to
use the headset.
use the headset.
Connecting/disconnecting a headset
If you cannot connect the headset and base
unit using the headset, you can connect using
the unit.
unit using the headset, you can connect using
the unit.
To use your headset with another Bluetooth
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
device such as a cellular phone, you may
need to disconnect it from the base unit.
Important:
R Make sure that the headset is turned on.
Base unit
*1 KX-TG7741 series: page 3
To connect:
Press MHEADSETN.
To disconnect:
Press and hold MHEADSETN until a long beep
sounds.
Press MHEADSETN.
To disconnect:
Press and hold MHEADSETN until a long beep
sounds.
Handset
1
To connect/disconnect:
MMENUN#622
R A long beep sounds.
MMENUN#622
R A long beep sounds.
2
MOFFN
Deregistering a headset
You can cancel a registration of the headset
that is stored to the base unit. See
“Deregistering Bluetooth devices”, page 21.
that is stored to the base unit. See
“Deregistering Bluetooth devices”, page 21.
Operating a Bluetooth wireless
headset using a landline
headset using a landline
Important:
R Refer to your headset operating instructions
R Refer to your headset operating instructions
for headset operations.
Answering landline calls with your
headset
headset
To answer a landline call, turn on your
headset referring to your headset operating
instructions.
headset referring to your headset operating
instructions.
When you finish talking, turn off your headset
referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your
referring to your headset operating
instructions.
Note:
R If you cannot hang up the call using your
headset;
– press MnN (STOP) on the base unit.
– press MnN (STOP) on the base unit.
(KX-TG7731 series: page 3)
For assistance, please visit http://www.panasonic.com/help
47
Using Bluetooth Devices
TG7731_41_(en-en)_1121_ver.021.p47 47
2011/11/21 12:02:14