Panasonic KX-TG1837AL Manuel D’Utilisation
Useful Information
46
The handset display is blank.
L
The handset is not turned on. Turn the power on
(page 13).
(page 13).
The handset will not turn on.
L
Make sure that the batteries are installed correctly
(page 12).
(page 12).
L
Fully charge the batteries (page 12).
L
Clean the charge contacts and charge again (page
12).
12).
I have changed the display
language to a language I cannot
read.
language to a language I cannot
read.
L
Change the display language (page 14).
I cannot make or receive calls.
L
The AC adaptor or telephone line cord is not
connected. Check the connections.
connected. Check the connections.
L
If you are using a splitter to connect the unit,
remove the splitter and connect the unit to the wall
socket directly. If the unit operates properly, check
the splitter.
remove the splitter and connect the unit to the wall
socket directly. If the unit operates properly, check
the splitter.
L
Disconnect the base unit from the telephone line
and connect the line to a known working telephone.
If the working telephone operates properly, contact
our service personnel to have the unit repaired. If
the working telephone does not operate properly,
contact your service provider/telephone company.
and connect the line to a known working telephone.
If the working telephone operates properly, contact
our service personnel to have the unit repaired. If
the working telephone does not operate properly,
contact your service provider/telephone company.
L
You dialled a call restricted number (page 23).
L
The unit is not designed to be used with rotary
(pulse dialling) services.
(pulse dialling) services.
The unit does not ring.
L
The batteries should be charging
but the battery icon does not
change.
but the battery icon does not
change.
L
Clean the charge contacts and charge again (page
12).
12).
A busy tone is heard when {C} is
pressed.
pressed.
L
The handset is too far from the base unit. Move
closer and try again.
closer and try again.
L
Another handset is on an outside call. Wait for the
other user to complete the call.
other user to complete the call.
Static is heard, sound cuts in and
out. Interference from other
electrical units.
out. Interference from other
electrical units.
L
Place the handset and the base unit away from
other electrical appliances.
other electrical appliances.
L
Move closer to the base unit.
L
Your unit is connected to a telephone line with
ADSL service. We recommend connecting a filter
(contact your ADSL service provider) to the
telephone line between the base unit and the
telephone line socket.
ADSL service. We recommend connecting a filter
(contact your ADSL service provider) to the
telephone line between the base unit and the
telephone line socket.
Problem
Cause & solution
TG1831-1837AL(e).book Page 46 Friday, February 3, 2006 2:24 PM