Lucent Technologies 555-670-111 Manuel D’Utilisation
MERLIN LEGEND Communications System Release 7.0
System Programming
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-48
System Operator Positions
3
Console Display/Instructions
Additional Information
PC
4.
Specify the DLC extension as a DLC position.
5.
Assign or remove the DLC operator extension.
Select
Enter
or
Delete.
6.
Indicate that you have finished entering all positions.
Select
Store
All.
DLC Operator Positions:
If no DSS is attached:
Enter extension
SP: “Entering an Extension”
Ã
If DSS is attached:
Store All
Delete
Toggle the red LED on or
Backspace
off as required. Go to Step 6.
Exit
Enter
On = extension is currently assigned
Off = extension cannot be assigned
as a DLC position.
Flashing = extension can be assigned
as a DLC position.
as a DLC position.
Flashing = extension can be assigned
as a DLC position.
You may continue to assign or remove
DLC operator positions by repeating
Steps 4 and 5.
DLC operator positions by repeating
Steps 4 and 5.
The session is terminated, and the system
restarts. You must enter system
programming again to continue.
restarts. You must enter system
programming again to continue.