Lucent Technologies 555-670-111 Manuel D’Utilisation
MERLIN LEGEND Communications System Release 7.0
System Programming
System Programming
555-670-111
Issue 1
April 1999
Programming Procedures
3-660
Memory Card
3
A mismatch exists between the hardware components present on the current
system and the hardware components reflected in the backup file. The restore is
aborted. You can do one of the following:
system and the hardware components reflected in the backup file. The restore is
aborted. You can do one of the following:
■
Repeat the restore procedure with another file.
■
Modify the system hardware to match the configuration of the backup file
and repeat the restore procedure with the same file.
and repeat the restore procedure with the same file.
Strap in Place for Key Mode but Mode is
Set to Hybrid
Set to Hybrid
3
!
CAUTION:
This procedure should be performed only by qualified service personnel.
If the processor module has been set for Permanent Key mode, a restore to
Hybrid/PBX mode is not possible. A service associate must be notified in order to
modify the processor.
Hybrid/PBX mode is not possible. A service associate must be notified in order to
modify the processor.
Restore n:
n
= filename selected
Restore Failure
RESTORE IS CANCELED.
Restore File Mode is
Hybrid/PBX. Control Unit
strap in place for KEY.
Exit