Honeywell 128BPTSIA Manuel D’Utilisation
– 7 –
System Overview (cont’d)
NOTE: Cross Zoning and Swinger Suppression options can help reduce false alarms.
Ask your installer if your system is programmed for either of these features. An Abort
Window feature exists for all non-fire zones. All non-fire alarm reports are NOT
transmitted to the central station if the code + off sequence is entered within the
Abort Window time period. Ask your installer if this feature has been programmed.
Ask your installer if your system is programmed for either of these features. An Abort
Window feature exists for all non-fire zones. All non-fire alarm reports are NOT
transmitted to the central station if the code + off sequence is entered within the
Abort Window time period. Ask your installer if this feature has been programmed.
There is also a 5-minute Cancel Window feature in your system. Starting at the end
of the Abort Window you can cancel an alarm. A cancel signal is transmitted if either
the alarm system is disarmed or both a disarm and a function key is pressed during
the 5-minute Cancel Window time-period. A message of alarm aborted will appear on
the keypad screen if this condition occurs.
of the Abort Window you can cancel an alarm. A cancel signal is transmitted if either
the alarm system is disarmed or both a disarm and a function key is pressed during
the 5-minute Cancel Window time-period. A message of alarm aborted will appear on
the keypad screen if this condition occurs.
Burglary Protection
The burglary protection portion of your system must be turned on or "armed" before it
will sense burglary alarm conditions. Your system provides four modes of burglary
protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to
BYPASS selected zones of protection while leaving the rest of the system armed. The
system also provides a CHIME mode, for alerting users to the opening and closing of
doors and windows while the system is disarmed. Refer to the other sections of this
manual for procedures for using these features.
will sense burglary alarm conditions. Your system provides four modes of burglary
protection: STAY, AWAY, INSTANT and MAXIMUM, and even allows you to
BYPASS selected zones of protection while leaving the rest of the system armed. The
system also provides a CHIME mode, for alerting users to the opening and closing of
doors and windows while the system is disarmed. Refer to the other sections of this
manual for procedures for using these features.
The following table lists the four different arming modes and the results of each.
Features For Each Arming Mode
Arming
Mode
Mode
Exit
Delay
Entry
Delay
Perimeter
Armed
AWAY Yes
Yes
Yes
STAY* Yes
Yes
Yes
INSTANT* Yes No Yes
MAXIMUM Yes No Yes
MAXIMUM Yes No Yes
* The system provides three different STAY and INSTANT arming modes. See
ARMING IN THE STAY MODES and ARMING IN THE INSTANT MODES
sections for details on these modes.
ARMING IN THE STAY MODES and ARMING IN THE INSTANT MODES
sections for details on these modes.
Memory of Alarm
When an alarm condition occurs, the keypad displays the number(s) of the zone(s)
that caused the problem, and displays the type of alarm (ex. FIRE, ALARM). It
remains displayed until it is cleared by disarming the system (see DISARMING THE
SYSTEM section).
that caused the problem, and displays the type of alarm (ex. FIRE, ALARM). It
remains displayed until it is cleared by disarming the system (see DISARMING THE
SYSTEM section).