Lorex Technology SG6352 Manuel D’Utilisation

When connecting additional cameras to this system, ensure the camera is set to a 
different channel. Use the Channel Selector button to navigate between channels.  

The video security system provides you with the option to automatically scan/switch 
between four camera locations. If you are utilizing less than four cameras, you can also 
set the system to scan only within two or three locations.

Setting Auto Scan to 2 or 3 camera locations:

1. Press and hold the Auto/Manual button for more than 2 seconds. All four 

LED lights on the front of the receiver will turn ON.  Releasing the 
Auto/Manual button to remain in the four channel switching option.

2. Continue to press and hold the Auto/Manual button.  The Channel 4 LED

button will turn off.  The system is now set to scan between three camera
locations (Channel 1-3).

3.  Continue to press and hold the Auto/Manual button.  The Channel 3 LED

button will now be turned off.  The system is now set to scan between two
camera locations (Channel 1-2).

4.  Continue to press and hold the Auto/Manual button to return to the four

camera viewing option (all four LED lights will be illuminated).

8

The receiver will automatically do a self diagnostic when it is powered up to
determine how many cameras are connected. It will detect which channels are receiving a 
video signal. To purchase additional wireless cameras, please visit
www.lorexcctv.com