APC NBRK0550 Manuel D’Utilisation

Click the Camera View button in the Action/Information pane to view live video captured by the 
appliance, cameras connected to the appliance, or shared IP cameras on your network. Controls are 
applied to the top-most camera image. Click an image to change its position to the top. To view all 
camera images side by side, click the Tiled check box.

For information on shared IP cameras, see “Pod, Pelco Camera, and Rack Access PX-HID 
Sharing” on page 93.

To change the size of the image, right-click the camera image, and select Configure 
Camera. Select Settings, and, from the Mode drop-down list, choose dimensions 
(resolution) for the image. The dimensions 640x480, for example, mean 640 pixels wide by 
480 pixels high. N

: As the image dimensions increase, the maximum image rate 

available will decrease.

For more information, see “Camera Usage Considerations” on page 161.

To change the frame rate, that is, the frequency that the video image is updated, make a 
selection from the Refresh Rate drop-down list in the Camera View. N

: The 

maximum rate available is determined by the mode setting (described above) and, if 
applicable, the image quality settings.

: The maximum frame rate for shared IP cameras is limited to 15 frames per second.

For more information on image quality settings, see “Capture settings” on page 38.

For details on the relationship between the mode and image quality settings and the 
maximum frame rate available, see “Camera Usage Considerations” on page 161.

For more information on shared IP cameras, see “Pod, Pelco Camera, and Rack Access PX-
HID Sharing” on page 93.

This zoom feature does not apply to Pelco PTZ cameras. See “Pelco PTZ camera controls” 
on page 22 for details on the zoom features for Pelco PTZ cameras.

1. To avoid distortions, right-click the camera image and select Maintain aspect ratio.
2. Within the camera image, click and drag to draw a box around the area of interest.
3. Right-click the camera image and select Zoom in.
4. To return to the full camera image, right-click and select Zoom out.

 

Only available when a microphone is connected to the NetBotz appliance or a pod. Click to 
listen to streaming audio. Click again to turn off the audio.

†

 

 

Only available when speakers are connected to the NetBotz appliance or a pod. Click and 
hold the button while speaking into your system microphone. N

: While transmitting 

audio, you will not be able to hear audio from the device.

†

†

These audio features are only available when the Advanced Software Pack has been installed on 

the system running Advanced View. The Advanced Software Pack is included with a NetBotz 550 
or NetBotz 570 appliance, but must be purchased separately when using any other NetBotz 
appliance. To check if the software pack has been installed, click the Configuration button, then 
click License Keys from the Appliance Settings area.