SVAT Electronics CV301-8CH Manuel D’Utilisation

CV301-8CH

now you can see

This menu selection allows you to change the device ID, enable password protection as well as set a new password for 

users and admin on your DVR. When you enable password protection, you will be prompted to insert a password each 

time you wish to access the main menu. The DVR will automatically log the user of admin out after 60 seconds. 

To Change the Device ID: 
1.  Select the box next to “device ID” and a keyboard will appear.
2.  Type the name you would like then select enter to close the keyboard. 
3.  Select “apply” to save your changes. 
 
To Enable Password Protection: 
1.  Select the scroll bar next to “password enable” and list will appear.
2.  Highlight and select “On” to turn the password enable on. 
3.  Select “apply” to save your changes.

To Change the Password 
You have the option to change the password for user and admin. A user will only be able to access the search menu to 

view saved footage, whereas an admin will be able to access anything in the menu. Both default passwords are set to 

123456.
1.  Make sure password enable is set to “ON”. 
2.  Select the ****** box next to the password you would like to change and a keyboard will appear. 
3.  Type the password you would like then select enter to close the keyboard.
4.  Press “Menu” and highlight “Next” to confirm. 
5.  Type in the same password again, next to “confirm” in order to confirm the password then select enter to close the 

keyboard.  

6.  Once you have entered the desired password, select “apply” to save your changes.