VIVOTEK FD8167-(T) Manuel D’Utilisation

 

 

■ Event name: Enter a name for the event setting.

■ Enable this event: Select this option to enable the event setting.

■ Priority: Select the relative importance of this event (High, Normal, or Low). Events with a higher 

   priority setting will be executed first.

■ Detect next motion detection or digital input after   seconds: Enter the duration in seconds to pause 

motion detection after a motion is detected� This can prevent event-related actions to be too frequently 

performed� 

1� 

Schedule

Specify the period of time during which the event trigger will take place� Please select the days of the 

week and the time in a day (in 24-hr time format) for the event triggering schedule�

2� Trigger 

This is the cause or stimulus which defines when to trigger the Network Camera. The trigger source can 

be configured to use the Network Camera’s built-in motion detection mechanism or external digital input 

devices� 

There are several choices of trigger sources as shown on next page� Select the item to display the 

detailed configuration options. 

■ Video motion detection

This option makes use of the built-in motion detection mechanism as a trigger source� To enable this 

function, you need to configure a Motion Detection Window first. For more information, please refer to 

Motion Detection on page 120 for details� 

■ Periodically

This option allows the Network Camera to trigger periodically for every other defined minute. Up to 999 

minutes are allowed� 

■ Digital input

This option allows the Network Camera to use an external digital input device or sensor as a trigger 

source� Depending on your application, there are many choices of digital input devices on the market 

which helps to detect changes in temperature, vibration, sound, and light, etc�

■ System boot

This option triggers the Network Camera when the power to the Network Camera is disconnected�

■ Recording notify

This option allows the Network Camera to trigger when the recording disk is full or when recording 

starts to rewrite older data�