VIVOTEK FD8167-(T) Manuel D’Utilisation

 

 

For example, your router and IP settings may look like this:

Device

IP Address: internal 

port

IP Address: External Port (Mapped port on 

the router)

Public IP of router

122�146�57�120

LAN IP of router

192�168�2�1

Camera 1

192.168.2.10:80

122.146.57.120:8000

Camera 2

192.168.2.11:80

122.146.57.120:8001

���

���

���

Configure the router, virtual server or firewall, so that the router can forward any data 

coming into a preconfigured port number to a network camera on the private network, and 

allow data from the camera to be transmitted to the outside of the network over the same 
path� 

From

Forward to

122.146.57.120:8000

192.168.2.10:80

122.146.57.120:8001

192.168.2.11:80

���

���

When properly configured, you can access a camera behind the router using the HTTP 

request as follows: http://122.146.57.120:8000

If you change the port numbers on the Network configuration page, please open the ports 

accordingly on your router� For example, you can open a management session with your 

router to configure access through the router to the camera within your local network. 

Please consult your network administrator for router configuration if you have troubles with 

the configuration. 

For more information with network configuration options (such as that of streaming ports), 

please refer to Configuration > Network Settings. VIVOTEK also provides the automatic 

port forwarding feature as an NAT traversal function with the precondition that your router 

must support the UPnP port forwarding feature�