ABC Office 06502 Manuel D’Utilisation

 
 
 
 
 
 

1. Locate the baseplate, cap nuts 

and washers. 

 
2. Place the antenna on top of 

the baseplate, aligning the 
holes in the antenna base with 
the studs on the baseplate. 
Make sure that the power 
supply wire is in the channels 
of the antenna base and is not 
crushed between the antenna 
base and the baseplate. 

 
3. Attach the washers and cap 

nuts to the bolts on the 
baseplate. DO NOT TIGHTEN.

 
4. Again make sure that the 

power wire is not crushed 
between the antenna base and 
baseplate and tighten the cap 
nuts with a ½” wrench. 

 
 
 
 
 
 
5. Connect the wire on the power 

supply to the power wire 
connected to the antenna. The 
wires will only connect in one 
direction. 

2 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

www.abcoffice.com

1-800-658-8788