Avaya 03-300430 Manuel D’Utilisation

on page 30 shows alarm-related LEDs on the faceplate of the 

G700 or on an attendant console, and shows how certain LEDs reflect specific alarm situations.

Alarms logged by Communication Manager are stored in an alarm log. All alarms include a date 
and time stamp that reflects the date and time of the sending device. The alarm contains:

●

Device type

●

Component type

●

Device name

●

Current ip address

●

Additional information necessary for identification of alarm origination

●

Severity level to indicate the priority of the alarm

Alarms originating in a specific media server, such as an S8300, have a prefix denoting that of 
an S8300.

ALARM LED

Attendant Console

The system alarm causes the attendant console ALARM 

LED to light.

ACK LED

Attendant Console

The ACK LED on the attendant console reflects the state 

of acknowledgement of the alarm report from INADS. 

However, this is only possible for S8700-based Media 

Servers.

RED ALM or

ALARM LED

LED Panel of G700 

Media Gateway

The RED ALM or ALARM LED indicates the "health" of 

the G700 by lighting when there are impaired functions 

of the Media Gateway Processor, Layer 2 Switching 

Processor, or VOIP engine. It lights, for example, when 

the power supply voltage is out of bounds, if the G700 

cannot locate a Media Servers, or when the unit is 

overheating. It also indicates when the system is in 

Power-up mode, or when a Media Module is resetting.