Avaya 03-300430 Manuel D’Utilisation
ATM-EI (Expansion Interface Circuit Pack)
Issue 1 June 2005
525
ATM-EI (Expansion Interface Circuit Pack)
S8700 MC
ATM-EI covers the ATM circuit pack administered as an Expansion Interface (ATM-EI) for ATM
Port-Network Connectivity (ATM PNC). The ATM-EI provides PNC between a S8700
Multi-Connect server and every PN through the ATM switch.
The circuit packs listed in
Port-Network Connectivity (ATM PNC). The ATM-EI provides PNC between a S8700
Multi-Connect server and every PN through the ATM switch.
The circuit packs listed in
page 525 are ATM-EI boards if they are administered to support ATM Port Network Connectivity
(ATM PNC) for
(ATM PNC) for
S8700 MC
.
Note:
Note:
TN230x circuit packs are not interchangeable. Always replace an ATM circuit
pack with the same type.
pack with the same type.
Note:
Note:
ATM switch maintenance is not covered in this section. When S8700
Multi-Connect system maintenance software suspects the ATM switch
connections, it raises appropriate Communication Manager alarms.
To clear any ATM switch faults, refer to the particular ATM switch’s
documentation.
Multi-Connect system maintenance software suspects the ATM switch
connections, it raises appropriate Communication Manager alarms.
To clear any ATM switch faults, refer to the particular ATM switch’s
documentation.
MO Name in Alarm Log
Alarm
Level
Level
Initial Command to
Run
Run
Full Name of MO
ATM-EI
MAJ
test board location ATM Expansion Interface
circuit pack
ATM-EI
MIN
test board location ATM Expansion Interface
circuit pack
ATM-EI
WRN
test board location ATM Expansion Interface
circuit pack
Table 167: ATM-EI circuit packs for S8700 Multi-Connect
Circuit pack
Fiber
Echo cancellation
TN2305
Multimode
Y
TN2306
Single mode
Y