Avaya 03-300430 Manuel D’Utilisation
Alarms in Linux Media Servers
Issue 1 June 2005
87
Back to:
8
MIN
“service httpd could not be restarted” — The hypertext transfer protocol
daemon is down. The Web interface will not work.
daemon is down. The Web interface will not work.
1. Enter /sbin/service httpd restart to restart the http daemon.
2. If the daemon restarts, manually clear the alarm, either from the:
2. If the daemon restarts, manually clear the alarm, either from the:
●
Web interface, by selecting Alarms and Notification, the
appropriate alarm, and Clear
appropriate alarm, and Clear
●
Linux command line, by entering almclear -n #id
If not, escalate this problem for explicit guidance with steps 2
through
a. Enter grep svc_mon /var/log/messages to investigate why the
daemon failed.
Since the following commands cause a brief service outage, they should only
be executed at the customer’s convenience.
b. If the grep command’s output does not help:
●
S8700 | 8710
: enter server to verify that the suspected server is the
standby. If necessary and at the customer’s convenience, enter
server -if to force a server interchange.
server -if to force a server interchange.
●
S8500
: Proceed to Step
If necessary and at the customer’s convenience, enter server -if to
force a server interchange.
c.
S8700 | 8710
: Reboot the standby server, either from the:
●
Web interface, by selecting Shutdown This Server
●
Linux command line, entering /sbin/shutdown -r now
d.
S8500
: Reboot the server, either from the:
●
Web interface, by selecting Shutdown This Server
●
Linux command line, entering /sbin/shutdown -r now
3. If rebooting the standby does not help or if the problem recurs, escalate
the problem to the next higher tier.
Table 23: SVC_MON Alarms in Media Server (continued)
Event
ID
Alarm
Level
Level
Alarm Text, Cause/Description, Recommendation
8 of 8