Exmark Diesel Manuel D’Utilisation
Specifications
Specifications
Model Numbers
Serial Nos: 720,000 and Higher
FR25KD
Systems
Engine
•
Engine Specifications: See your Engine Owner’s
Manual
Manual
•
RPM: Full Speed: 3870 +50/-100 RPM (No
Load) Idle: 1400 ±50 RPM (No Load)
Load) Idle: 1400 ±50 RPM (No Load)
Fuel System
•
Capacity: 8.5 gal. (32 L)
•
Type of Fuel: Diesel fuel, 40 cetane or higher.
•
Fuel Filter: Two In-line 15 Micron Kubota P/N
12581-43012, before and after the electric fuel
pump.
12581-43012, before and after the electric fuel
pump.
•
Fuel gauge at the rear of the right hand fuel tank.
Electrical System
•
Charging System: External Alternator
•
Charging Capacity: 60 amps
•
Battery Type: BCI Group 26
•
Battery Voltage: 12 Volt
•
Polarity: Negative Ground
•
Fuses: One 15 amp, one 20 amp, and one 40 amp
blade type
blade type
Safety Interlock System
•
PTO must be disengaged, brake engaged, and
motion control levers out (neutral lock) to start
engine. (It is not necessary for the operator to be
in the seat to start the engine.)
motion control levers out (neutral lock) to start
engine. (It is not necessary for the operator to be
in the seat to start the engine.)
•
Operator must be in seat when PTO is engaged,
brake is disengaged, or motion control levers are
moved in or engine will stop.
brake is disengaged, or motion control levers are
moved in or engine will stop.
•
Engine will stop if the motion control levers
are moved from neutral position while brake is
engaged.
are moved from neutral position while brake is
engaged.
Cooling System
•
Fan: Belt driven with continuous operation with
engine running.
engine running.
•
Coolant Liquid: 50/50 mix of DexCool©
extended life antifreeze and water.
extended life antifreeze and water.
•
Coolant Capacity: 4 quarts
Operator Controls
•
Steering and Motion Control:
Note: Motion control levers are adjustable to
three heights.
three heights.
– Separate levers, on each side of the console,
control speed and direction of travel of the
respective drive wheels.
respective drive wheels.
– Steering is controlled by varying the position
of the levers relative to each other.
– Moving motion control levers outward (in
slots) locks the drive system in neutral.
•
PTO Engagement Switch: Engages drive to PTO
(mower deck).
(mower deck).
•
Parking Brake Lever: Engages parking brake by
pulling back.
pulling back.
Seat
•
Type: Standard seat with high back, foam padded
(internal suspension) and armrests and integral
safety switch.
(internal suspension) and armrests and integral
safety switch.
Optional seat accessories for units with standard
seats:
seats:
– Custom ride suspension system to enhance
Standard Seat.
– Deluxe suspension seat with high back, low
profile foam-in-place cushion (dampened,
adjustable spring suspension), armrests, and
integral safety switch.
adjustable spring suspension), armrests, and
integral safety switch.
14