Bosch DVA-16K Manuel D’Utilisation

RAID Subsystem DVA-16K | Installation Manual

Subsystem Monitoring  | en 25 

Bosch Security System

F.01U.027.799 | V2 | 2008.08

The following devices all come with LEDs that inform subsystem managers about the opera-

tional status of the component on which they are mounted. The RAID subsystem has a total of 

49 status-indicating LEDs distributed over the active components in the following ways:

LED definitions are given in the following sections.

The LCD panel shown in Figure 4.1 consists of five (5) buttons, three (3) LEDs, and a 16x2-

character LCD screen that indicates subsystem status. Press “ENT” button for two (2) sec-

onds on the initial screen to enter the main menu. Press the “ESC” button to clear current 

event. 

Press the ENT button for two (2) seconds on the initial screen to enter the Main Menu. Press 

the ESC button to clear the current event. 

Press the UP and DOWN arrow keys to select viewing items. In the last item, “View and Edit 

Event Logs,” the most recent event is displayed first. 

For dual RAID controllers, the LCD shows the status of the primary controller. Press the UP 

and DOWN arrow keys for more than one (1) second to display the status of the secondary 

controller.

The MUTE button can be used to stop the alarm until the next controller event occurs.

3

3

See 

2

32

See 

5

5

See 

2

2

1

1

See 

1

2

See 

2

4

See 

LED Distribution