Bosch DVA-16K Manuel D’Utilisation

RAID Subsystem DVA-16K | Installation Manual

Subsystem Connection and Operation | en 41 

Bosch Security System

F.01U.027.799 | V2 | 2008.08

The LCD screen startup sequence is shown and described in the sequence below:

If you wish to power down the RAID subsystem, please follow these steps:

1.

Stop I/O access to the system. 

Use the software provided on the host computer to stop all IO accesses to the RAID sub-

system. Please refer to the user’s manual that came with your host computer.

2.

Flush the cache.

Use the “Shutdown Controller” function to flush all cached data. This prepares the RAID 

subsystem to be powered down.

3.

Turn off the power.

 Turn off the power switches at the top of the rear panel. Once the subsystem has been 

powered down, other devices that are connected to the subsystem may be powered 

down. 

This screen appears when the PSUs are turned on.

This screen appears after the initialization process. 

It clearly shows the model name.

Verifying installed cache memory.

System is ready. You can now start to configure the 

subsystem.

If you wish to power down the RAID subsystem, please ensure that no time-consuming pro-

cesses, like a “logical drive parity” check or a “background scrub,” are running.