Bosch D1265 Manuel D’Utilisation
D1265 | Owner's Manual | Part II: System Commands
20
Bosch Security Systems, Inc. | 9/10 | F01U169130-02
Master Arming all Areas
If you prefer, you might use the
Master Arm
command in the function list. Press the
Menu button
to access the function list configured in the keypad.
1. Ensure your keypad shows idle text.
2. Press the
Menu button to enter the function list,
then press the
Next button repeatedly.
When you reach the
Master Arm button, press
it.
3. Press the button.
4. The display might prompt you to enter your
passcode.
The passcode is shown as asterisks (*) when
entered.
entered.
5. If more than one area is configured, the system
gives the option to arm all areas with
Master
Arm All. To arm all areas, proceed to Step 9.
6. To arm a selected area, press
Next until the
desired area appears (Area name text along
with
with
Arm Area #).
7. Then press
Arm.
8. The next available area appears with the option
to arm it.
Every time the
Next, Previous or Arm buttons
are pressed, the display scrolls to the next
unarmed area.
unarmed area.
9. To arm all available areas, press the
Arm
button when the display reads
Master Arm All.
The display changes to show that all authorized
areas are arming.
areas are arming.
The display shows
Exit Now! # (# = exit delay
time remaining).
After the exit delay time expires, the display
changes to idle armed text.
changes to idle armed text.
10. To disarm your security system, enter your
personal passcode and press
ENTER.
11. The display changes to show that all the areas
are disarmed.
The display returns to idle text.