Samsung 2 Manuel D’Utilisation

Page de 29
 
 
 
 
 
 
5
camera will not take a photo when you push the shutter button. Press the Power 
button once to turn on the camera again. 
•  If power is low, the red LED blinks 5 times and then the camera turns off.  Recharge 
the battery immediately. 
 
Turning on the LCD 
The LCD screen comes on automatically in preview mode when the power is turned on. 
Press the LCD button once more to switch to preview mode with icons visible. Press the 
LCD button again to turn off the LCD. 
 
Understanding LCD icons  
 
LCD Description 
 
Picture Counter. Shows remaining number of shots.
 
 
 
 
 
Indicates Battery Charge State  
 : The battery has ample charge.
 
 : The battery is approximately half-charged.  Suggest charging it before 
next use. 
 : The battery has no charge.  Please recharge immediately. 
 
Secure Digital card indicator
 
 
Strobe indicator. Flashes on and off while charging.  Steady on when flash is set to 
Automatic.
 
Mode selection 
Your camera has three modes of operation:  
•  Picture-taking (for capturing images) 
•  Playback (for reviewing and deleting images) 
•  USB mode (for downloading images to a computer and charging the battery)  
 
When the USB cable is connected to the camera and a computer, the camera automatically 
goes to USB mode. 
 
Picture-taking mode  
The green LED will be solid when the camera is ready to take pictures.  If the green LED is 
blinking, the camera is not ready.  It may blink for 1 second while storing an image and for 5 
seconds while recharging the flash.