Intel DG43RK LGA-775 socket DDR3 1333/1066 MHz 8GB BOXDG43RK Manuel D’Utilisation
Codes de produits
BOXDG43RK
Intel Desktop Board DG43RK Technical Product Specification
56
2.3
BIOS Configuration Jumper Block
CAUTION
Do not move the jumper with the power on. Always turn off the power and unplug the
power cord from the computer before changing a jumper setting. Otherwise, the
board could be damaged.
power cord from the computer before changing a jumper setting. Otherwise, the
board could be damaged.
Figure 14 shows the location of the BIOS configuration jumper block. The jumper
determines the BIOS Setup program’s mode. Table 28 lists the jumper settings for the
three modes: normal, configure, and recovery. When the jumper is set to configure
mode and the computer is powered-up, the BIOS compares the processor version and
the microcode version in the BIOS and reports if the two match.
determines the BIOS Setup program’s mode. Table 28 lists the jumper settings for the
three modes: normal, configure, and recovery. When the jumper is set to configure
mode and the computer is powered-up, the BIOS compares the processor version and
the microcode version in the BIOS and reports if the two match.
Figure 14. Location of the BIOS Configuration Jumper Block