Emerson CF905ORB00 Manuel D’Utilisation

4

U.L. Model No.: CF905

1. Remove the 10-24 x 3/8” pan head screw with lockwasher

nearest the hook from the ceiling mounting plate and retain for
later use. Loosen the remaining two 10-24 x 3/8” pan head
screws several turns.

2. While still attached to the mounting plate hook, pivot the fan

motor assembly upwards and mate it up against the ceiling
mounting plate.  Align and engage the two keyhole slots with
the two loosened screw heads.  

3. Securely tighten both 10-24 x 3/8” pan head screws.

4. Reinstall the previously removed 10-24 x 3/8” pan head screw

with lock washer to lock the motor assembly onto the ceiling
mounting plate.

5. Loosen two opposing 10-24 x 3/8” pan head screws and

remove the remaining two 10-24 x 3/8” pan head screws from
the outer rim of the ceiling mounting plate.

6. Slide the fan housing trim ring over the fan housing cover.

7. Position the fan housing cover over the fan motor assembly,

align and rotate the housing to engage the two loosened 10-24
x 3/8” pan head screw heads in the ceiling mounting plate.
Securely tighten both screws.

8. Reinstall the previously removed 10-24 x 3/8” pan head screws

to lock the housing cover onto the ceiling mounting plate.

9. Push the trim ring upwards and rotate so that it engages and

locks onto the four mounting screw heads of the fan housing
cover.

10. Mount the blade flanges to the fan blades using three 10-24 x

5/16” washer head blade screws per blade (supplied). Repeat
for the four remaining blades.

FAN MOTOR 
ASSEMBLY

KEY HOLE SLOT

10-24 x 3/8" PAN 
HEAD SCREW WITH 
LOCKWASHER (3)

FAN HOUSING 
COVER

FAN CEILING 
MOUNTING PLATE

REINSTALL THE 
TWO PREVIOUSLY 
REMOVED 10-24 x 
3/8" PAN HEAD 
SCREWS

TIGHTEN TWO OPPOSING 10-24 x 3/8" 
PAN HEAD SCREWS

CEILING
TRIM RING

FAN
HOUSING
COVER

MOUNTING
SCREW HEADS

FAN BLADE

10-24 x 5/16" WASHER 
HEAD BLADE SCREW (3)

BLADE FLANGE

EMERSON QUICK START GUIDE